Valid

JB/T 8061-2011Single-screw plastics extruders (English PDF)

单螺杆塑料挤出机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8061-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 15, 2011

Implementation date

November 1, 2011

Scope

JB/T 8061-2011 is the English-translated version of 单螺杆塑料挤出机.

JB/T 8061-2011 is a recommended Chinese machinery industry standard for single-screw plastics extruders. It defines the series and the model specifications of the machine together with its basic parameters, and then sets requirements, tests and test methods, inspection rules and the provisions for marking, packaging, transport and storage.

The standard applies to single-screw extruders used in the processing of plastic products, and it does not apply to special extruders. Among the standards it quotes are GB/T 12783-2000, GB/T 13384 and HG/T 3228-2001.

It supersedes JB/T 8061-1996 and was issued by the Ministry of Industry and Information Technology, under Chinese classification G95 and international classifications 71.120 and 83.200.

Found what you need?

Document preview — JB/T 8061-2011

National Standard of the People's Republic of China

ICS
71.120; 83.200
Replacing
JB/T 8061-1996

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 8061-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 August 2011 and has been in force since 1 November 2011.

It replaces the earlier edition JB/T 8061-1996.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard for single-screw plastics extruders. It defines the series and the model specifications of the machine together with its basic parameters, and then sets requirements, tests and test methods, inspection rules and the provisions for marking, packaging, transport and storage. The standard applies to single-screw extruders used in the processing of plastic products, and it does not apply to special extruders. Among the standards it quotes are GB/T 12783-2000, GB/T 13384 and HG/T 3228-2001. It supersedes JB/T 8061-1996 and was issued by the Ministry of Industry and Information Technology, under Chinese classification G95 and international classifications 71.120 and 83.200.

JB/T 8061-2011 falls under ICS 71.120; 83.200, in the field of chemical technology.

This catalogue holds 70 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB/T 6388

GB/T 9969

GB/T 12783-2000 — Editorial nominating method for the modeldesignation of rubber and plastics machinery

GB/T 13306

GB/T 13384

HG/T 3228-2001 — General technical specifications for painting of rubber and plastics machinery

JB/T 8538

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 8061-1996 (earlier edition)

Standards on related subjects:

GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines

JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines

GB 20055-2006 — Safety requirements of mill for rubber and plastics

JB/T 6491-2015 — Counter-rotating twin-screw plastics extruder

JB/T 6490-2015 — Plastics compression moulding presses

JB/T 5418-2015 — Plastics nonwoven textile machine

6 Classification and status

International classification (ICS): 71.120; 83.200

Chinese Standard Classification (CCS): G 95

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 8061

EditionTitleRevisionStatus
JB/T 8061-2011Single-screw plastics extruderscurrent editionCurrent
JB/T 8061-1996Single-screw plastics extrudersprevious editionSuperseded

This page sells the current edition, JB/T 8061-2011. Earlier editions are listed for reference only.

How to Download JB/T 8061-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8061-2011

$225.00