HG/T 4379-2012Sintered high flux heat exchanger tubes (English PDF)
烧结型高通量换热管
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4379-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2012
Implementation date
March 1, 2013
Scope
HG/T 4379-2012 is the English-translated version of 烧结型高通量换热管.
HG/T 4379-2012 is the recommended chemical industry standard of China for sintered high flux tubes used in heat exchangers.
It gives terms and definitions, the classification code and the marking, then the requirements, the test methods, the inspection rules, and rules for packaging, transportation and the quality certificate that accompanies the tubes.
Petrochemical service is the application it is written for. A long list of documents is cited, including GB/T 228, GB/T 241, GB/T 242, GB/T 246, GB/T 2102, GB/T 6462, GB/T 8163, GB 9948, GB/T 15749, GB/T 21650.1 and parts 1 to 8 of NB/T 47019.
It is placed under Chinese classification G91 and international classification 71.120.30 and 23.040. Issued on 7 November 2012, it has applied since 1 March 2013.
Found what you need?
Document preview — HG/T 4379-2012
National Standard of the People's Republic of China
- ICS
- 71.120.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4379-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2012 and has been in force since 1 March 2013.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended chemical industry standard of China for sintered high flux tubes used in heat exchangers. It gives terms and definitions, the classification code and the marking, then the requirements, the test methods, the inspection rules, and rules for packaging, transportation and the quality certificate that accompanies the tubes. Petrochemical service is the application it is written for. A long list of documents is cited, including GB/T 228, GB/T 241, GB/T 242, GB/T 246, GB/T 2102, GB/T 6462, GB/T 8163, GB 9948, GB/T 15749, GB/T 21650.1 and parts 1 to 8 of NB/T 47019. It is placed under Chinese classification G91 and international classification 71.120.30 and 23.040.
HG/T 4379-2012 falls under ICS 71.120.30, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 228
GB/T 241
GB/T 242
GB/T 246
GB/T 2102
GB/T 6462
GB/T 8163
GB/T 8888
GB/T 8890
GB 9948
GB/T 15749
GB/T 21650.1
NB/T 47019.1
NB/T 47019.2
NB/T 47019.3
NB/T 47019.4
NB/T 47019.5
NB/T 47019.6
NB/T 47019.7
NB/T 47019.8
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 29465-2023 — Flange of floating heat exchangers
HG/T 2100-2020 — Mechanical seals for liquid ring chlorine pumps
HG/T 2099-2020 — Test code for mechanical seals of stirred vessels
HG/T 2044-2020 — Plasma-sprayed chromium oxide seal rings for mechanical seals - Technical specifications
6 Classification and status
International classification (ICS): 71.120.30
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 228Metallic materials - Tensile testing at ambient temperature
- GB/T 241Metallic materials — Tube — Hydrostatic pressure test
- GB/T 242Metal materials -- Tube -- Drift-expending test
- GB/T 246Metallic materials -- Tube -- Flattening test
- GB/T 2102Acceptance, packaging, marking and quality certification for steel tubular products
- GB/T 6462Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
Similar standards
How to Download HG/T 4379-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 9948-1988 — Seamless steel tubes for petroleum cracking
GB 9948-2006 — Seamless steel tubes for petroleum cracking
GB/T 15749-1995 — Manual measuring method in quantitative metallography
HG/T 4379-2012
$135.00