Valid

HG/T 4274-2011Extruders for thermosetting powder coatings (English PDF)

热固性粉末涂料挤出机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4274-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 4274-2011 is the English-translated version of 热固性粉末涂料挤出机.

HG/T 4274-2011 is the recommended chemical industry standard of China for extruders used in the manufacture of thermosetting powder coatings. It gives terms and definitions, specifications and parameters, requirements, test methods, inspection rules and the provisions for packaging, transport and storage.

It covers single screw reciprocating pin extruders, including three-row and four-row kneading pin types, twin screw extruders and extruders of other constructions.

It extends as well to the ancillary systems of these machines: feeding, metal pelletizing, heating and cooling, and lubrication pumping. The standard quotes GB/T 191, GB 2894, GB 4208, GB 5226.1, GB/T 15706.2, GB 16754, GB 23821, HG/T 2006-2006 and HG/T 3110, among others. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 4274-2011

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 4274-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the recommended chemical industry standard of China for extruders used in the manufacture of thermosetting powder coatings. It gives terms and definitions, specifications and parameters, requirements, test methods, inspection rules and the provisions for packaging, transport and storage. It covers single screw reciprocating pin extruders, including three-row and four-row kneading pin types, twin screw extruders and extruders of other constructions. It extends as well to the ancillary systems of these machines: feeding, metal pelletizing, heating and cooling, and lubrication pumping. The standard quotes GB/T 191, GB 2894, GB 4208, GB 5226.1, GB/T 15706.2, GB 16754, GB 23821, HG/T 2006-2006 and HG/T 3110, among others.

HG/T 4274-2011 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,683 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 Normative references

GB/T 191

GB 2894

GB 4208

GB/T 4728.1

GB/T 4728.2

GB/T 4728.3

GB/T 4728.4

GB/T 4728.5

GB/T 4728.6

GB/T 4728.7

GB/T 4728.8

GB/T 4728.9

GB/T 4728.10

GB/T 4728.11

GB/T 4728.12

GB/T 4728.13

GB 5226.1

GB/T 5465.1

GB/T 5465.2

GB/T 6404.1

GB/T 6988.1

GB/T 1095.1

GB/T 1095.2

GB/T 15706.2

GB 16754

GB/T 19678

GB/T 13306

GB 23821

HG/T 2006-2006 — Thermosetting powder coatings

HG/T 3110

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels

HG/T 3914-2006 — Steam tube rotary drum dryers

HG/T 5998-2024 — Volatile organic compound cyclone adsorption-catalytic combustion device

HG/T 4273-2011 — Premixers for thermosetting powder coatings

HG/T 4272-2011 — Pellet centrifugal dryers

6 Classification and status

Chinese Standard Classification (CCS): G 92

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 1095.1 · GB/T 1095.2 · GB 23821

Similar standards

How to Download HG/T 4274-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4274-2011

$135.00