HG/T 4594-2014Cooling and flaking equipment for thermosetting powder coatings (English PDF)
热固性粉末涂料冷却压片设备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4594-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
HG/T 4594-2014 is the English-translated version of 热固性粉末涂料冷却压片设备.
Cooling and flaking equipment for thermosetting powder coatings is the subject of HG/T 4594-2014, a recommended standard of the Chinese chemical industry.
The standard sets out terms and definitions, the series of specification parameters, the requirements, test methods and inspection rules, and the provisions for packaging, transport, storage and the technical documentation that leaves the works with the machine.
It is classified G92 in the Chinese system and indexed under 71.120 and 75.180.20. It is applied with GB/T 191, GB/T 1184-1996, GB 2894, GB 4208, GB 5226.1, GB/T 6404.1, GB/T 6988.1, GB 12265.3, GB/T 13306, GB/T 15706.2, GB 16754, GB/T 19678, GB 23821 and HG/T 2006. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — HG/T 4594-2014
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4594-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Cooling and flaking equipment for thermosetting powder coatings is the subject of HG/T 4594-2014, a recommended standard of the Chinese chemical industry. The standard sets out terms and definitions, the series of specification parameters, the requirements, test methods and inspection rules, and the provisions for packaging, transport, storage and the technical documentation that leaves the works with the machine. It is classified G92 in the Chinese system and indexed under 71.120 and 75.180.20.
HG/T 4594-2014 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB 2894
GB 4208
GB 5226.1
GB/T 5465.1~GB/T 5465.2
GB/T 6404.1
GB/T 6988.1
GB 12265.3
GB/T 13306
GB/T 15706.2
GB 16754
GB/T 19678
GB 23821
HG/T 2006
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 4596-2014 — Turbo dryers
HG/T 4595-2014 — Fine grinding equipment for thermosetting powder coatings
HG/T 4591-2014 — Chemical hydraulic turbines
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 92
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB 2894Safety colours and safety signs
- GB 4208Degrees of Protection Provided By Enclosure (IP Code)
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 5465.1~GB/T 5465.2Graphical symbols for use on electrical equipment -- Part 1: Overview and classification
GB 12265.3 · GB 23821
Similar standards
How to Download HG/T 4594-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HG/T 4594-2014
$205.00