Valid

HG/T 4595-2014Fine grinding equipment for thermosetting powder coatings (English PDF)

热固性粉末涂料微粉粉碎设备

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4595-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 6, 2014

Implementation date

October 1, 2014

Scope

HG/T 4595-2014 is the English-translated version of 热固性粉末涂料微粉粉碎设备.

HG/T 4595-2014 is a recommended Chinese chemical industry standard for the fine grinding equipment used to make thermosetting powder coatings.

It gives terms and definitions, the series of specification parameters, the requirements, test methods and inspection rules, and then packaging, transport, storage and the technical documents supplied with the machine.

As process equipment it is classified G92 and indexed under 71.120 and 75.180.20. Its quoted documents range from GB 150, GB 2894, GB 4208, GB 5226.1 and GB 12265.3 to GB/T 15706.2, GB/T 19678, GB 23821, GB/T 25295 and HG/T 2006-2006. Issued on 6 May 2014, it has applied since 1 October 2014.

Found what you need?

Document preview — HG/T 4595-2014

National Standard of the People's Republic of China

ICS
71.120

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4595-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended Chinese chemical industry standard for the fine grinding equipment used to make thermosetting powder coatings. It gives terms and definitions, the series of specification parameters, the requirements, test methods and inspection rules, and then packaging, transport, storage and the technical documents supplied with the machine. As process equipment it is classified G92 and indexed under 71.120 and 75.180.20. Its quoted documents range from GB 150, GB 2894, GB 4208, GB 5226.1 and GB 12265.3 to GB/T 15706.2, GB/T 19678, GB 23821, GB/T 25295 and HG/T 2006-2006.

HG/T 4595-2014 falls under ICS 71.120, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB 150

GB/T 191

GB 2894

GB 4208

GB 5226.1

GB/T 5465.1

GB/T 6404.1

GB/T 6988.1

GB 12265.3

GB/T 13306

GB/T 15577

GB/T 15605

GB/T 15706.2

GB 16297

GB 16754

GB/T 19678

GB 23821

GB/T 25295

HG/T 2006-2006 — Thermosetting powder coatings

GB/T 5465.2

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels

HG/T 3914-2006 — Steam tube rotary drum dryers

HG/T 4596-2014 — Turbo dryers

HG/T 4594-2014 — Cooling and flaking equipment for thermosetting powder coatings

HG/T 4591-2014 — Chemical hydraulic turbines

6 Classification and status

International classification (ICS): 71.120

Chinese Standard Classification (CCS): G 92

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4595-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4595-2014

$235.00