HG/T 4266-2011Textile dyeing and finishing auxiliaries - Determination of solid content (English PDF)
纺织染整助剂 含固量的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4266-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 4266-2011 is the English-translated version of 纺织染整助剂 含固量的测定.
Under HG/T 4266-2011 the Chinese chemical industry set the recommended method for determining the solid content of textile dyeing and finishing auxiliaries. The standard describes the determination and states that it may be used on auxiliaries of every type that contain solids.
Results are expressed and rounded in accordance with GB/T 8170-2008. It was prepared under the Ministry of Industry and Information Technology. It sits alongside the companion methods for ionicity and for water and oil repellency published at the same time. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 4266-2011
National Standard of the People's Republic of China
- ICS
- 71.100.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4266-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Under HG/T 4266-2011 the Chinese chemical industry set the recommended method for determining the solid content of textile dyeing and finishing auxiliaries. The standard describes the determination and states that it may be used on auxiliaries of every type that contain solids. Results are expressed and rounded in accordance with GB/T 8170-2008. It was prepared under the Ministry of Industry and Information Technology. It sits alongside the companion methods for ionicity and for water and oil repellency published at the same time.
HG/T 4266-2011 falls under ICS 71.100.40, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
4 Where this standard sits
It cites one other standard, GB/T 8170-2008, listed in full above.
18 other standards in this catalogue cite it, among them HG/T 4437-2012, HG/T 4438-2012, HG/T 4439-2012.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Standards on related subjects:
GB/T 1677-2023 — Determinating the epoxy value of plasticizers
GB/T 1668-2008 — Plasticizers - Determination of acid value and acidity
GB/T 1676-2008 — Determinating the iodine value of plasticizers
HG/T 4264-2022 — Textile dyeing and finishing auxiliaries - Water and oil repellent finishing agents - Determination of water repellency
HG/T 4261-2022 — Textile dyeing and finishing auxiliaries - Levelling agents for polyester - Determination of high-temperature dispersibility
HG/T 4260-2011 — Textile dyeing and finishing auxiliaries - Determination of total amine value of amino silicone oils
7 Classification and status
International classification (ICS): 71.100.40
Chinese Standard Classification (CCS): G 70
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Cited by
- HG/T 4916-2016Textile dyeing and finishing auxiliaries - Hydrogen peroxide stabilizers - Determination of stabilizing performance on hydrogen peroxide
- HG/T 4917-2016Textile dyeing and finishing auxiliaries - Amino silicone oil softeners - Determination of hydrophilicity
- HG/T 4919-2016Textile dyeing and finishing auxiliaries - Penetrating agents - Determination of alkali-resistant penetrability
- HG/T 4655-2014Textile dyeing and finishing auxiliaries - Levelling agents for polyester
- HG/T 4661-2014Textile dyeing and finishing auxiliaries - Phosphorus-free scouring agents
- HG/T 4729-2014Textile dyeing and finishing auxiliaries - Acid fixing agents
Similar standards
How to Download HG/T 4266-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
HG/T 2016-2026 — Rubber-soled sports shoes for basketball and volleyball
HG/T 2018-2026 — Lightweight rubber shoes
HG/T 4266-2011
$85.00