HG/T 4236-2011Rubber parts for damping spacers (English PDF)
阻尼间隔棒橡胶件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4236-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 4236-2011 is the English-translated version of 阻尼间隔棒橡胶件.
HG/T 4236-2011 is the Chinese chemical industry standard, recommended in status, for the rubber parts of damping spacers. It states the requirements for these parts and the test methods and inspection rules used to verify them, together with marking, packaging, transport and storage.
The parts covered are the rubber components of the damping spacers used on alternating current and direct current overhead transmission lines.
A long list of rubber test standards supports it, namely GB/T 528, GB/T 529, GB/T 531.1, GB/T 533, GB/T 2439, GB/T 3672.1-2002, GB/T 7762, GB/T 9867 and GB/T 9870.1, with HG/T 3090, HG/T 3843 and HG/T 3866 from the industry's own series. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 4236-2011
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 4236-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard, recommended in status, for the rubber parts of damping spacers. It states the requirements for these parts and the test methods and inspection rules used to verify them, together with marking, packaging, transport and storage. The parts covered are the rubber components of the damping spacers used on alternating current and direct current overhead transmission lines. A long list of rubber test standards supports it, namely GB/T 528, GB/T 529, GB/T 531.1, GB/T 533, GB/T 2439, GB/T 3672.1-2002, GB/T 7762, GB/T 9867 and GB/T 9870.1, with HG/T 3090, HG/T 3843 and HG/T 3866 from the industry's own series.
HG/T 4236-2011 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,683 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 Normative references
GB/T 528
GB/T 529
GB/T 531.1
GB/T 533
GB/T 2439
GB/T 3672.1-2002 — Rubber - Tolerances of products - Part 1: Dimensional tolerances
GB/T 7762
GB/T 9867
GB/T 9870.1
HG/T 3090
HG/T 3843
HG/T 3866
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 14833-2020 — Synthetic materials sports field surfaces
HG/T 4070-2008 — Silicone rubber sheets
GB/T 5574-2008 — Industrial rubber sheet
HG/T 6323-2024 — Two-piece can coloring rubber rollers
HG/T 2793-2023 — Conductive and antistatic rubber sheets for industrial use
HG/T 4237-2011 — Silicone rubber cushion pads for card-making laminators
6 Classification and status
Chinese Standard Classification (CCS): G 47
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 529Rubber, vulcanized or thermoplastic -- Determination of tear strength (Trouser, angle and crescent test pieces)
- GB/T 531.1Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
- GB/T 533Rubber, vulcanized or thermoplastic -- Determination of density
- GB/T 2439Conducting and dissipative rubbers -- Vulcanized or thermoplastic -- Measurement of resistivity
- GB/T 3672.1-2002Tolerances for rubber products - Part 1: Dimensional tolerances
Similar standards
How to Download HG/T 4236-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2439-1981 — Conducting and antistatic rubber--Determination of resistivity
GB/T 2439-2001 — Conducting and dissipative rubbers -- Vulcanized or thermoplastic -- Measurement of resistivity
GB/T 3672.1-2002 — Rubber - Tolerances of products - Part 1: Dimensional tolerances
HG/T 4236-2011
$85.00