HG/T 4805-2015Rubber shoes - Determination of adhesion strength between rubber parts and fabrics (English PDF)
胶鞋 胶制部件与织物粘合强度的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4805-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
HG/T 4805-2015 is the English-translated version of 胶鞋 胶制部件与织物粘合强度的测定.
HG/T 4805-2015 is a recommended chemical industry standard of China and one of the test-method standards for rubber footwear. It describes how the force needed to separate the rubber parts of a shoe from the fabric bonded to them is measured, the separation being made by peeling the bonded layer apart.
The method is written for footwear of all kinds, whatever the bonding used between the two materials. Its Chinese classification is Y78, among rubber and plastics products.
The standard quotes GB/T 2941, GB/T 12833 and GB/T 16825.1. Issued on 30 April 2015, it has applied since 1 October 2015.
Found what you need?
Document preview — HG/T 4805-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 4805-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended chemical industry standard of China and one of the test-method standards for rubber footwear. It describes how the force needed to separate the rubber parts of a shoe from the fabric bonded to them is measured, the separation being made by peeling the bonded layer apart. The method is written for footwear of all kinds, whatever the bonding used between the two materials. Its Chinese classification is Y78, among rubber and plastics products. The standard quotes GB/T 2941, GB/T 12833 and GB/T 16825.1.
HG/T 4805-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,683 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 Normative references
GB/T 2941
GB/T 12833-2006 — Rubber and plastics -- Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
GB/T 16825.1-2008 — Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
QB/T 4556-2023 — Snow boots
QB/T 4552-2020 — Slippers
HG/T 4993-2016 — Cellular materials for shoes - Test method for resilience
HG/T 4808-2015 — Mesh fabrics for shoes
HG/T 4807-2015 — Rubber shoes - Test methods for insoles, linings and insocks - Perspiration resistance
HG/T 4806-2015 — Rubber shoes - Test methods for outsoles - Compression set
6 Classification and status
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2941Rubber - General procedures for preparing and conditioning test pieces for physical test methods
- GB/T 12833-2006Rubber and plastics -- Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
- GB/T 16825.1-2008Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
Similar standards
How to Download HG/T 4805-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12833-2006 — Rubber and plastics -- Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
GB/T 16825.1-2008 — Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
GB/T 2941-1991 — Rubber-Standard temperatures, humidities and times for the conditioning environmental and testing of test pieces
HG/T 4805-2015
$95.00