HG/T 4174-2011Reinforced ultra-pure PFA shell-and-tube heat exchangers (English PDF)
超纯PFA列管加强式换热器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4174-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 4174-2011 is the English-translated version of 超纯PFA列管加强式换热器.
HG/T 4174-2011 is the Chinese chemical industry standard for reinforced ultra-pure PFA shell-and-tube heat exchangers.
It carries the terminology and definitions, the classification, the product designation and the specifications, then the technical requirements, the inspection methods, the inspection rules and the provisions on marking, packaging, transport and storage.
The exchangers it covers are built from metal-reinforced ultra-pure PFA tubes, metal-reinforced ultra-pure fluoroplastic tubesheets and heads lined with ultra-pure fluoroplastic.
Pressure vessel and heat exchanger practice is taken from GB 150, GB 151, GB/T 23711.1-2009, GB/T 23711.6-2009, GB 50073-2001, HG/T 20678-2000 and JB/T 4735. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 4174-2011
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 4174-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for reinforced ultra-pure PFA shell-and-tube heat exchangers. It carries the terminology and definitions, the classification, the product designation and the specifications, then the technical requirements, the inspection methods, the inspection rules and the provisions on marking, packaging, transport and storage. The exchangers it covers are built from metal-reinforced ultra-pure PFA tubes, metal-reinforced ultra-pure fluoroplastic tubesheets and heads lined with ultra-pure fluoroplastic. Pressure vessel and heat exchanger practice is taken from GB 150, GB 151, GB/T 23711.1-2009, GB/T 23711.6-2009, GB 50073-2001, HG/T 20678-2000 and JB/T 4735.
HG/T 4174-2011 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,683 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 Normative references
GB 150
GB 151
GB/T 23711.1-2009 — Spark test methods fluorine plastic lining pressure vessel
GB/T 23711.6-2009 — Hydrostatic pressure test method for pressure vessels lined with fluoroplastics
GB 50073-2001 — Code for design of clean room
HG/T 20678-2000 — Specification on Design of Steel Shell with Liner
JB/T 4735
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 2055.1-2024 — Glass-lined manhole
HG/T 4173-2011 — Packed towers lined with ultra-pure PFA sheet
HG/T 4172-2011 — Shell-and-tube polytetrafluoroethylene heat exchangers
6 Classification and status
Chinese Standard Classification (CCS): G 94
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- GB 151Tubular heat exchangers [including MODIFICATION 1]
- GB/T 23711.1-2009Test method for pressure vessels lined with plastics—Part 1:Spark testing
- GB/T 23711.6-2009Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing
- GB 50073-2001Code for design of clean room
- HG/T 20678-2000Standard for design of steel shells for lined chemical equipment
Similar standards
How to Download HG/T 4174-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
HG/T 4174-2011
$85.00