HG/T 4173-2011Packed towers lined with ultra-pure PFA sheet (English PDF)
超纯PFA板衬衬里填料塔
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4173-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 4173-2011 is the English-translated version of 超纯PFA板衬衬里填料塔.
HG/T 4173-2011 deals with packed towers lined with ultra-pure PFA sheet. It gives the terms and definitions, the product designation, the sizes, the technical requirements, the test methods and inspection rules, and the provisions for signs, packaging, transport, storage and installation.
The towers in scope are those in which ultra-pure PFA sheet is bonded to the equipment as an anti-corrosion or antifouling lining, protecting the equipment from the medium or an ultra-pure medium from contamination, for design pressures from 0.1 MPa to 2.5 MPa.
It does not apply to equipment heated by direct flame, equipment exposed to radiation, or equipment subject to vibration or sudden changes of temperature. GB 150, GB/T 8923, GB/T 23711.1-2009, GB/T 23711.6-2009, GB 50073-2001, HG 20202, HG/T 20678-2000 and JB/T 4735 are quoted. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 4173-2011
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4173-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
HG/T 4173-2011 deals with packed towers lined with ultra-pure PFA sheet. It gives the terms and definitions, the product designation, the sizes, the technical requirements, the test methods and inspection rules, and the provisions for signs, packaging, transport, storage and installation. The towers in scope are those in which ultra-pure PFA sheet is bonded to the equipment as an anti-corrosion or antifouling lining, protecting the equipment from the medium or an ultra-pure medium from contamination, for design pressures from 0.1 MPa to 2.5 MPa. It does not apply to equipment heated by direct flame, equipment exposed to radiation, or equipment subject to vibration or sudden changes of temperature. GB 150, GB/T 8923, GB/T 23711.1-2009, GB/T 23711.6-2009, GB 50073-2001, HG 20202, HG/T 20678-2000 and JB/T 4735 are quoted.
HG/T 4173-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 150
GB/T 8923
GB/T 23711.1-2009 — Spark test methods fluorine plastic lining pressure vessel
GB/T 23711.6-2009 — Hydrostatic pressure test method for pressure vessels lined with fluoroplastics
GB 50073-2001 — Code for design of clean room
HG 20202
HG/T 20678-2000 — Specification on Design of Steel Shell with Liner
JB/T 4735
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 2058.1-2024 — Glass-lined thermometer sleeve
HG/T 2055.1-2024 — Glass-lined manhole
HG/T 4172-2011 — Shell-and-tube polytetrafluoroethylene heat exchangers
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 94
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 8923Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previ
- GB/T 23711.1-2009Test method for pressure vessels lined with plastics—Part 1:Spark testing
- GB/T 23711.6-2009Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing
- GB 50073-2001Code for design of clean room
- HG 20202Code for construction and acceptance of degreasing project
Similar standards
How to Download HG/T 4173-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
HG/T 4173-2011
$105.00