HG/T 4172-2011Shell-and-tube polytetrafluoroethylene heat exchangers (English PDF)
管壳式聚四氟乙烯换热器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4172-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 4172-2011 is the English-translated version of 管壳式聚四氟乙烯换热器.
HG/T 4172-2011 is the Chinese chemical industry standard for shell-and-tube heat exchangers made of polytetrafluoroethylene. It classifies these exchangers and sets the requirements they must meet, the test methods used to check them, the inspection rules, and the provisions for marking, packaging, transport and storage.
It covers exchangers manufactured with polytetrafluoroethylene as the heat-transfer material. The catalogue places it under Chinese classification G94 and international classifications 71.120 and 83.140, chemical equipment together with rubber and plastics products.
It is applied with GB/T 1033.1, GB/T 1040.1, GB/T 1041, GB/T 9341, HG/T 2902, HG/T 20592-2009, JB/T 4735 and QB/T 3624. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 4172-2011
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4172-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for shell-and-tube heat exchangers made of polytetrafluoroethylene. It classifies these exchangers and sets the requirements they must meet, the test methods used to check them, the inspection rules, and the provisions for marking, packaging, transport and storage. It covers exchangers manufactured with polytetrafluoroethylene as the heat-transfer material. The catalogue places it under Chinese classification G94 and international classifications 71.120 and 83.140, chemical equipment together with rubber and plastics products.
HG/T 4172-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1033.1
GB/T 1040.1
GB/T 1041
GB/T 9341
HG/T 2902
HG/T 20592-2009 — Steel Pipe Flanges
HG/T 20640
JB/T 4735
QB/T 3624
QB/T 3625
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 2058.1-2024 — Glass-lined thermometer sleeve
HG/T 2055.1-2024 — Glass-lined manhole
HG/T 4173-2011 — Packed towers lined with ultra-pure PFA sheet
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 94
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1033.1Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
- GB/T 1040.1Plastics - Determination of tensile properties - Part 1: General principles
- GB/T 1041Plastics -- Determination of compressive properties
- GB/T 9341Plastics -- Determination of flexural properties
- HG/T 2902Polytetrafluoroethylene resin for molding
- HG/T 20592-2009Steel Pipe Flanges
HG/T 20640 · QB/T 3624 · QB/T 3625
Similar standards
How to Download HG/T 4172-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1033.1-2008 — Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
GB/T 1040.1-2006 — Plastics - Determination of tensile properties - Part 1: General principles
GB/T 1040.1-2018 — Plastics - Determination of tensile properties - Part 1: General principles
HG/T 4172-2011
$90.00