HG/T 4112-2009Plastic-lined storage tanks and tank-type vessels - Technical specifications (English PDF)
塑料衬里储槽和罐式容器技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4112-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 4, 2009
Implementation date
June 1, 2010
Scope
HG/T 4112-2009 is the English-translated version of 塑料衬里储槽和罐式容器技术条件.
HG/T 4112-2009 is the Chinese chemical industry standard that gives the technical specifications for plastic-lined storage tanks and tank-type vessels.
It sits in the recommended series under Chinese classification G94 and ICS 71.120 and 83.140, that is, among chemical process equipment and plastics products, and it was issued by the Ministry of Industry and Information Technology.
The document quotes the pressure vessel standard GB 150-1998, the flange standards GB/T 9113.1 and GB/T 9124-2000, and the companion lining standards HG/T 4088 to HG/T 4093 and HG/T 20581.
The plastics are characterised through GB/T 1033, the GB/T 1040 parts and the GB/T 1844 parts, while GB/T 8923-1998, GB/T 9019 and GB/T 14436 are cited as well. Issued on 4 December 2009, it has applied since 1 June 2010.
Found what you need?
Document preview — HG/T 4112-2009
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4112-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 December 2009 and has been in force since 1 June 2010.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard that gives the technical specifications for plastic-lined storage tanks and tank-type vessels. It sits in the recommended series under Chinese classification G94 and ICS 71.120 and 83.140, that is, among chemical process equipment and plastics products, andThe document quotes the pressure vessel standard GB 150-1998, the flange standards GB/T 9113.1 and GB/T 9124-2000, and the companion lining standards HG/T 4088 to HG/T 4093 and HG/T 20581. The plastics are characterised through GB/T 1033, the GB/T 1040 parts and the GB/T 1844 parts, while GB/T 8923-1998, GB/T 9019 and GB/T 14436 are cited as well.
HG/T 4112-2009 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
GB/T 1033
GB/T 1040.1
GB/T 1040.2
GB/T 1040.3
GB/T 1040.4
GB/T 1040.5
GB/T 1844.1
GB/T 1844.2
GB/T 1844.3
GB/T 1844.4
GB/T 8923-1998
GB/T 9019
GB/T 9113.1
GB/T 9124-2000 — Specification for steel pipe flanges
GB/T 14436
HG/T 4088
HG/T 4089
HG/T 4090
HG/T 4091
HG/T 4092
HG/T 4093
HG/T 20581
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 2058.2-2024 — Glass-lined baffle thermometer sleeve
HG/T 2058.1-2024 — Glass-lined thermometer sleeve
HG/T 2055.1-2024 — Glass-lined manhole
6 Classification and status
International classification (ICS): 71.120
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150-1998Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 1033Test method for density and relative density of plastics
- GB/T 1040.1Plastics - Determination of tensile properties - Part 1: General principles
- GB/T 1040.2Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
- GB/T 1040.3Plastics—Determination of tensile properties—Part 3:Test conditions for films and sheets
- GB/T 1040.4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
Similar standards
How to Download HG/T 4112-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
GB/T 1033.1-2008 — Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
GB/T 1033-1986 — Test method for density and relative density of plastics
HG/T 4112-2009
$195.00