HG/T 4277-2011Plastic-lined steel tower vessels - Technical specifications (English PDF)
钢制塑料衬里塔式容器技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4277-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 4277-2011 is the English-translated version of 钢制塑料衬里塔式容器技术条件.
HG/T 4277-2011 is the recommended technical specification of the Chinese chemical industry for plastic-lined steel tower vessels. It covers their classification and naming, the requirements, the test methods and the trial rules, and then marking, packaging, transport and storage.
It applies to washing towers, rectifying towers, drying towers, absorbers and similar lined towers whose lining is ETFE, FEP, PE, PFA, polyolefin copolymer, PP, PTFE, PVC, PVDF or chlorotrifluoroethylene, in nominal sizes DN 300 mm to DN 4000 mm and with the nominal pressure fixed by the design.
It quotes GB 150, JB/T 4701 and JB/T 4702, HG/T 4088 to HG/T 4093, HG 20581 and HG/T 20678. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 4277-2011
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4277-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended technical specification of the Chinese chemical industry for plastic-lined steel tower vessels. It covers their classification and naming, the requirements, the test methods and the trial rules, and then marking, packaging, transport and storage. It applies to washing towers, rectifying towers, drying towers, absorbers and similar lined towers whose lining is ETFE, FEP, PE, PFA, polyolefin copolymer, PP, PTFE, PVC, PVDF or chlorotrifluoroethylene, in nominal sizes DN 300 mm to DN 4000 mm and with the nominal pressure fixed by the design. It quotes GB 150, JB/T 4701 and JB/T 4702, HG/T 4088 to HG/T 4093, HG 20581 and HG/T 20678.
HG/T 4277-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 150
JB/T 4701
JB/T 4702
GB/T 1033.1
GB/T 1040.5
GB/T 1844.1
GB/T 8923
GB/T 9019
GB/T 9113.1
GB/T 13306
GB/T 14436
HG/T 4088
HG/T 4089
HG/T 4090
HG/T 4091
HG/T 4092
HG/T 4093
HG 20581
HG/T 20678
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 4286-2017 — Glass-lined heat exchange tubes
HG/T 4279-2011 — Support beams for chemical equipment towers
HG/T 4278-2011 — Lightweight ceramic packings for chemical equipment towers
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 94
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- JB/T 4701Type A slip-on welding flanges
- JB/T 4702Type B slip-on welding flanges
- GB/T 1033.1Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
- GB/T 1040.5Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
- GB/T 1844.1Plastics—Symbols and abbreviated terms—Part 1:Basic polymers and their special characteristics
Similar standards
How to Download HG/T 4277-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
HG/T 4277-2011
$225.00