HG/T 2055.2-2019Manholes with sight glass for glass-lined steel vessels (English PDF)
搪玻璃带视镜人孔
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2055.2-2019 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 24, 2019
Implementation date
July 1, 2020
Scope
HG/T 2055.2-2019 is the English-translated version of 搪玻璃带视镜人孔.
Part 2 of the HG/T 2055 series, HG/T 2055.2-2019, is the recommended Chinese chemical industry standard for manholes fitted with a sight glass on glass-lined steel vessels.
It defines the types, the basic parameters and the main dimensions, states the requirements, and covers the delivery documents, the packaging, the transport and the storage.
It applies to manholes with sight glasses on glass-lined vessels of nominal pressure not greater than 1.0 MPa and design temperature in the range -20 °C to 200 °C. GB/T 23259-2009, GB 25025, HG/T 2055.1 and HG/T 2144 are quoted by it.
It supersedes HG/T 2055.2-2013. Issued on 24 December 2019, it has applied since 1 July 2020.
Found what you need?
Document preview — HG/T 2055.2-2019
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 2055.2-2013
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2055.2-2019 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 December 2019 and has been in force since 1 July 2020.
It replaces the earlier edition HG/T 2055.2-2013, HG/T 2055.2-2007, HG/T 2055.2-1991.
It is one of 7 parts of the HG/T 2055 series.
2 Scope Preview
Part 2 of the HG/T 2055 series, HG/T 2055.2-2019, is the recommended Chinese chemical industry standard for manholes fitted with a sight glass on glass-lined steel vessels. It defines the types, the basic parameters and the main dimensions, states the requirements, and covers the delivery documents, the packaging, the transport and the storage. It applies to manholes with sight glasses on glass-lined vessels of nominal pressure not greater than 1.0 MPa and design temperature in the range -20 °C to 200 °C. GB/T 23259-2009, GB 25025, HG/T 2055.1 and HG/T 2144 are quoted by it. It supersedes HG/T 2055.2-2013.
HG/T 2055.2-2019 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 23259-2009 — Sight glass for pressure vessels
GB 25025
HG/T 2055.1
HG/T 2144
4 Where this standard sits
It cites 4 standards, among them GB/T 23259-2009, listed in full above.
It is one part of the HG/T 2055 series, of which this catalogue holds 7 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
HG/T 2055.1-1991 — Glass-lined manhole
HG/T 2055.1-2006 — Manhole for glass lined steel vessel
HG/T 2055.1-2015 — Manholes for glass-lined steel vessels
HG/T 2055.1-2024 — Glass-lined manhole
HG/T 2055.3-1991 — Tong glass into the hole with a balancer into the hole
HG/T 2055.4-1991 — Glass-lined hole with a sight glass and balancer into the hole
Other editions:
HG/T 2055.2-2013 (earlier edition)
HG/T 2055.2-2007 (earlier edition)
HG/T 2055.2-1991 (earlier edition)
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy
HG/T 2058.2-2024 — Glass-lined baffle thermometer sleeve
HG/T 2058.1-2024 — Glass-lined thermometer sleeve
7 Classification and status
International classification (ICS): 71.120
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of HG/T 2055.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2055.2-2019 | Manholes with sight glass for glass-lined steel vessels | current edition | Current |
| HG/T 2055.2-2013 | Manholes with sight glass for glass-lined steel vessels | previous edition | Superseded |
This page sells the current edition, HG/T 2055.2-2019. Earlier editions are listed for reference only.
How to Download HG/T 2055.2-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 2055.2-2019
$90.00