HG/T 4081-2009Centrifugal chlorine compressors (English PDF)
离心式氯气压缩机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4081-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 5, 2009
Implementation date
July 1, 2009
Scope
HG/T 4081-2009 is the English-translated version of 离心式氯气压缩机.
Centrifugal chlorine compressors are the subject of HG/T 4081-2009, a recommended standard of the Chinese chemical industry. It fixes the design, the materials, the manufacture, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.
It applies to centrifugal compressors that convey chlorine gas, and it states that it does not apply to the integrally geared centrifugal air compressor packages for the petroleum, chemical and gas industries covered by JB/T 4113.
Its quoted documents include GB/T 191-2000, GB/T 699, GB/T 1220, GB/T 3077, JB/T 1265-2002, JB/T 1266-2002, JB/T 3165, JB/T 4365 and JB/T 4385.1-1999. Issued on 5 February 2009, it has applied since 1 July 2009.
Found what you need?
Document preview — HG/T 4081-2009
National Standard of the People's Republic of China
- ICS
- 23.140
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4081-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 5 February 2009 and has been in force since 1 July 2009.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Centrifugal chlorine compressors are the subject of HG/T 4081-2009, a recommended standard of the Chinese chemical industry. It fixes the design, the materials, the manufacture, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. It applies to centrifugal compressors that convey chlorine gas, and it states that it does not apply to the integrally geared centrifugal air compressor packages for the petroleum, chemical and gas industries covered by JB/T 4113. Its quoted documents include GB/T 191-2000, GB/T 699, GB/T 1220, GB/T 3077, JB/T 1265-2002, JB/T 1266-2002, JB/T 3165, JB/T 4365 and JB/T 4385.1-1999.
HG/T 4081-2009 falls under ICS 23.140, in the field of fluid systems and general-purpose components.
This catalogue holds 16 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191-2000 — Packaging-Pictorial marking for handling of goods
GB/T 196
GB/T 197
GB/T 699
GB/T 700
GB/T 1174-1992 — Cast bearing metals
GB/T 1220
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 2888
GB/T 3077
GB/T 6414-1999 — Castings. System of dimensional tolerances and machining allowances
GB/T 9439-1988 — Grey iron castings
GB/T 13306-1991 — Plates
JB/T 1265-2002 — Specification for rotor and shaft forgings for 25 MW to 200MW steam turbines
JB/T 1266-2002 — Specification for disk and wheel forgings for 25MW to 200MW steam turbines
JB/T 1581-1996 — Rotor and shaft forgings for steam turbines and turbine generators - Ultrasonic testing method
JB/T 1592-1996
JB/T 3165
JB/T 4365
JB/T 4385.1-1999 — Open die forgings made on hammers - General technical specifications
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 5999-2024 — Volatile organic compound cyclone adsorption-condensation recovery device
HG/T 5998-2024 — Volatile organic compound cyclone adsorption-catalytic combustion device
HG/T 4086-2009 — Stop valves for biochemical processes
6 Classification and status
International classification (ICS): 23.140
Chinese Standard Classification (CCS): G 92
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2000Graphical symbols marking for handling and storage of packages
- GB/T 196General purpose metric screw threads - Basic dimensions
- GB/T 197General purpose metric screw threads -- Tolerances
- GB/T 699Quality carbon structure steels
- GB/T 700Carbon structural steels
- GB/T 1174-1992Cast bearing alloy
JB/T 1592-1996
Similar standards
How to Download HG/T 4081-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 4081-2009
$105.00