HG/T 4080-2009Test method for helium leakage of urea synthesis reactors (English PDF)
尿素合成塔氦渗漏试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4080-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 5, 2009
Implementation date
July 1, 2009
Scope
HG/T 4080-2009 is the English-translated version of 尿素合成塔氦渗漏试验方法.
HG/T 4080-2009 sets out, for the Chinese chemical industry, the helium leakage test method for urea synthesis reactors. It describes the preparation for the test, the apparatus, the steps of the method, the assessment of the result and the acceptance test report.
The method is meant for vertical urea synthesis towers whose shell carries a lining layer, where it is used to find defects in the welds of that lining: girth welds and lining seams, the fillet welds of flanges with inlay rings, the cover and inlay ring joints, the nozzle corner joints and the other penetration welds of the lined equipment.
GB 150, GB/T 9842 and JB/T 4730.5 are cited. Issued on 5 February 2009, it has applied since 1 July 2009.
Found what you need?
Document preview — HG/T 4080-2009
National Standard of the People's Republic of China
- ICS
- 23.020.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4080-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 5 February 2009 and has been in force since 1 July 2009.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
HG/T 4080-2009 sets out, for the Chinese chemical industry, the helium leakage test method for urea synthesis reactors. It describes the preparation for the test, the apparatus, the steps of the method, the assessment of the result and the acceptance test report. The method is meant for vertical urea synthesis towers whose shell carries a lining layer, where it is used to find defects in the welds of that lining: girth welds and lining seams, the fillet welds of flanges with inlay rings, the cover and inlay ring joints, the nozzle corner joints and the other penetration welds of the lined equipment. GB 150, GB/T 9842 and JB/T 4730.5 are cited.
HG/T 4080-2009 falls under ICS 23.020.30, in the field of fluid systems and general-purpose components.
This catalogue holds 16 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 150
GB/T 9842
JB/T 4730.5
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 4085-2009 — Pressure fiber bundle filters
HG/T 4084-2009 — Fully automatic water purification units with enhanced flocculation and sedimentation
HG/T 4083-2009 — Ion rod water treaters
6 Classification and status
International classification (ICS): 23.020.30
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download HG/T 4080-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
HG/T 4080-2009
$40.00