HG/T 4079-2009Inspection and evaluation rules for surface quality of polished metals (English PDF)
金属抛光表面质量检测及评判规则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4079-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 5, 2009
Implementation date
July 1, 2009
Scope
HG/T 4079-2009 is the English-translated version of 金属抛光表面质量检测及评判规则.
HG/T 4079-2009 is the recommended Chinese chemical industry standard holding the inspection and evaluation rules for the surface quality of polished metals. It states the general requirements for inspecting a polished metal surface, the rules by which such a surface is inspected and rated, and the requirements for protecting it afterwards.
It applies to the inspection of polished inner and outer surfaces of steel vessels, such as poly(vinyl chloride) polymerization reactors, polyether reactors and rubber mixing vessels, together with their matching heat exchangers and other equipment; polished surfaces on similar equipment may also be inspected by reference to it.
Surface texture and roughness comparison documents are quoted: GB/T 1031-1995, GB/T 3505-2000, GB/T 6060.1, GB/T 6060.2 and GB/T 6060.4. Issued on 5 February 2009, it has applied since 1 July 2009.
Found what you need?
Document preview — HG/T 4079-2009
National Standard of the People's Republic of China
- ICS
- 71.120.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4079-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 5 February 2009 and has been in force since 1 July 2009.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard holding the inspection and evaluation rules for the surface quality of polished metals. It states the general requirements for inspecting a polished metal surface, the rules by which such a surface is inspected and rated, and the requirements for protecting it afterwards. It applies to the inspection of polished inner and outer surfaces of steel vessels, such as poly(vinyl chloride) polymerization reactors, polyether reactors and rubber mixing vessels, together with their matching heat exchangers and other equipment; polished surfaces on similar equipment may also be inspected by reference to it. Surface texture and roughness comparison documents are quoted: GB/T 1031-1995, GB/T 3505-2000, GB/T 6060.1, GB/T 6060.2 and GB/T 6060.4.
HG/T 4079-2009 falls under ICS 71.120.01, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1031-1995 — Surface ronghness parameters and their values
GB/T 3505-2000 — Geometrical Product Specifications (GPS)-Surface texture: Profile method-Terms, definitions and surface texture parameters
GB/T 6060.1
GB/T 6060.2
GB/T 6060.4
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 29465-2023 — Flange of floating heat exchangers
HG/T 5825-2021 — Test method for distribution performance of liquid distributors in packed towers
HG/T 3155-2012 — Technical specifications for packing of chemical machinery parts
HG/T 4078-2009 — Cathodic protection - Technical specifications
6 Classification and status
International classification (ICS): 71.120.01
Chinese Standard Classification (CCS): G 90
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1031-1995Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 3505-2000Geometrical product specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters
- GB/T 6060.1Surface roughness comparison specimen—Part 1: Casting surface
- GB/T 6060.2Roughness comparison specimens -- Ground, turned, bored, milled, shaped and planed
- GB/T 6060.4Roughness comparison specimens--Polished surfaces
Similar standards
How to Download HG/T 4079-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1031-1995 — Surface ronghness parameters and their values
GB/T 3505-2000 — Geometrical Product Specifications (GPS)-Surface texture: Profile method-Terms, definitions and surface texture parameters
GB/T 6060.1-1985 — Roughness comparison specimens--Cast surfaces
HG/T 4079-2009
$125.00