GB/T 6060.3-2008Surface roughness comparison specimen - Part 3: Spark-eroded, shot-blasted, grit-blasted, lapped, filed and polished surface (English PDF)
表面粗糙度比较样块 第3部分：电火花、抛（喷）丸、喷砂、研磨、锉、抛光加工表面
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6060.3-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 28, 2008
Implementation date
August 1, 2008
Scope
GB/T 6060.3-2008 is the English-translated version of 表面粗糙度比较样块 第3部分：电火花、抛（喷）丸、喷砂、研磨、锉、抛光加工表面.
GB/T 6060.3-2008 is the Chinese standard "Surface roughness comparison specimen - Part 3: Spark-eroded, shot-blasted, grit-blasted, lapped, filed and polished surface".
Its scope clause reads: GB/T 6060 This section provides the spark, parabolic (jet) pill, sand blasting, grinding, filing, polishing and surface roughness comparison specimens term And definitions, manufacturing methods, surface features, surface roughness parameters, surface roughness evaluation, structure size, texture processing, marking and packaging.
This section applies to EDM, throw (spray) pill, sand blasting, grinding, filing, polishing and surface roughness comparison specimen.
The comparison specimens by And with its tactile and visual representations of the same material and processing methods for the test surface to determine the measured surface roughness parameters Surface roughness value comparison specimens (hereinafter referred to as "comparison specimen"). Its clauses include terms and definitions; manufacturing method.
Found what you need?
Document preview — GB/T 6060.3-2008
National Standard of the People's Republic of China
- ICS
- 17.040.30
- Classification
- J 42
- Replacing
- GB/T 6060.3-1986
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 manufacturing method
1 Scope
GB/T 6060 This section provides the spark, parabolic (jet) pill, sand blasting, grinding, filing, polishing and surface roughness comparison specimens term
And definitions, manufacturing methods, surface features, surface roughness parameters, surface roughness evaluation, structure size, texture processing, marking and packaging.
This section applies to EDM, throw (spray) pill, sand blasting, grinding, filing, polishing and surface roughness comparison specimen. The comparison specimens by
And with its tactile and visual representations of the same material and processing methods for the test surface to determine the measured surface roughness parameters
Surface roughness value comparison specimens (hereinafter referred to as "comparison specimen").
2 Normative references
The following documents contain provisions which, through reference to GB/T 6060 to the present, constitute provisions of this section. For dated references,
All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section
Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 1031-1995 Surface roughness parameters and their values
GB/T 6062-2002 Geometrical product specifications (GPS) Surface texture Profile method of contact (stylus) instruments nominal characteristics
GB/T 10610-1998 Surface texture Profile method - Rules and procedures for evaluation of the surface structure
GB/T 17164-1997 dimensional measuring instruments - Product terms
3 Terms and Definitions
GB/T 17164 and established in the following terms and definitions apply GB/T 6060 to the present section.
3.1
The use of specific materials and processing methods, with different surface roughness parameters, with the same tactile and visual materials and their characterization
Processing method for the same test surface to determine the measured surface roughness measuring instruments direct comparison.
3.2
File using grinding and processing methods, surface roughness comparison specimens known arithmetical mean deviation of the surface profile R Rao values.
3.3
Average of the readings on the nominal value of the deviation.
3.4
Typically machining marks from the direction of the major surface processing method of the decision.
4 manufacturing method
Comparison specimens manufactured by the following methods.
--- Copy electroforming method of a standard male mold surface; or […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- QC/T 273-2025Technical specifications of aluminum-alloy die casting for automobiles
- GB/T 15114-2023Aluminum alloy die castings
- GB/T 36493-2018Detemination of the flowability for glass fiber chopped stands
- GB/T 36494-2018Determination of the electrostatic property for glass fiber roving
- JB/T 20012-2015Medicinal trough type mixer
- JB/T 20017-2015Water chestnut-type coating pans
Similar standards
Editions of GB/T 6060.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 6060.3-2008 | Surface roughness comparison specimen - Part 3: Spark-eroded, shot-blasted, grit-blasted, lapped, filed and polished surface | current edition | Current |
| GB/T 6060.3-1986 | Surface roughness comparison specimen - Part 3: Spark-eroded, shot-blasted, grit-blasted, lapped, filed and polished surface | previous edition | Superseded |
This page sells the current edition, GB/T 6060.3-2008. Earlier editions are listed for reference only.
How to Download GB/T 6060.3-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6060.1-2018 — Surface roughness comparison specimen—Part 1: Casting surface
GB/T 6060.2-2006 — Roughness comparison specimens -- Ground, turned, bored, milled, shaped and planed
GB/T 7251.4-2026 — Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Secure payment via Stripe
Payments accepted
GB/T 6060.3-2008
$115.00