HG/T 3984-2007Chemical resistant modified polypropylene storage tanks (English PDF)
耐化学腐蚀改性聚丙烯储槽
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3984-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
September 22, 2007
Implementation date
April 1, 2008
Scope
HG/T 3984-2007 is the English-translated version of 耐化学腐蚀改性聚丙烯储槽.
HG/T 3984-2007 is the Chinese chemical industry standard for chemical resistant modified polypropylene storage tanks. It sets out the classification of the product, the technical requirements, the inspection rules and the marking and accompanying documents.
The tanks it covers are produced by secondary processing of plastics from modified polypropylene laminated or extruded sheet as the main material, and they are meant for service at atmospheric pressure at temperatures between -10 °C and 80 °C. The material and the finished tank are judged against the plastics test standards it quotes, among them GB/T 1033, GB/T 1040.2, GB/T 1043, GB/T 1633, GB/T 4217, GB/T 9341, GB 9969.1, GB/T 10798 and GB/T 11547, with HG/T 20640. Issued on 22 September 2007, it has applied since 1 April 2008.
Found what you need?
Document preview — HG/T 3984-2007
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3984-2007 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 September 2007 and has been in force since 1 April 2008.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for chemical resistant modified polypropylene storage tanks. It sets out the classification of the product, the technical requirements, the inspection rules and the marking and accompanying documents. The tanks it covers are produced by secondary processing of plastics from modified polypropylene laminated or extruded sheet as the main material, and they are meant for service at atmospheric pressure at temperatures between -10 °C and 80 °C. The material and the finished tank are judged against the plastics test standards it quotes, among them GB/T 1033, GB/T 1040.2, GB/T 1043, GB/T 1633, GB/T 4217, GB/T 9341, GB 9969.1, GB/T 10798 and GB/T 11547, with HG/T 20640.
HG/T 3984-2007 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1033
GB/T 1040.2
GB/T 1043
GB/T 1633
GB/T 4217
GB/T 9919
GB/T 9341
GB 9969.1
GB/T 10798
GB/T 11547
HG/T 20640
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 2058.1-2024 — Glass-lined thermometer sleeve
HG/T 2055.1-2024 — Glass-lined manhole
HG/T 3986-2016 — Plastic tower packings
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 94
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1033Test method for density and relative density of plastics
- GB/T 1040.2Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
- GB/T 1043Plastics Determination of charpy impact strength of rigid materials
- GB/T 1633Plastics - Thermoplastic materials - Determination of Vicat softerning temperature(VST)
- GB/T 4217Thermoplastics pipes for the conveyance of fluids—Nominal outside diameters and nominal pressures
- GB/T 9341Plastics -- Determination of flexural properties
GB/T 9919 · HG/T 20640
Similar standards
How to Download HG/T 3984-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 9969.1-1998 — General principles for preparation of instructions for use of industrial products
GB/T 1033.1-2008 — Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
GB/T 1033-1986 — Test method for density and relative density of plastics
HG/T 3984-2007
$195.00