HG/T 3870-2008Vulcanized rubber - Determination of swelling index (English PDF)
硫化橡胶溶胀指数测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3870-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
HG/T 3870-2008 is the English-translated version of 硫化橡胶溶胀指数测定方法.
The determination of the swelling index of vulcanized rubber is the subject of HG/T 3870-2008, a recommended standard of the Chinese chemical industry. It sets out the test method by which that index is measured, the index being used to follow the degree of cure reached by a rubber.
It applies to natural and synthetic rubber vulcanizates at the various stages of vulcanization commonly met in practice. Conditioning and the preparation of the test pieces follow GB/T 2941 and GB/T 6038.
The standard supersedes the 2006 edition HG/T 3870-2006. Issued on 1 February 2008, it has applied since 1 July 2008.
Found what you need?
Document preview — HG/T 3870-2008
National Standard of the People's Republic of China
- ICS
- 83.060
- Replacing
- HG/T 3870-2006
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 3870-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.
It replaces the earlier edition HG/T 3870-2006.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
The determination of the swelling index of vulcanized rubber is the subject of HG/T 3870-2008, a recommended standard of the Chinese chemical industry. It sets out the test method by which that index is measured, the index being used to follow the degree of cure reached by a rubber. It applies to natural and synthetic rubber vulcanizates at the various stages of vulcanization commonly met in practice. Conditioning and the preparation of the test pieces follow GB/T 2941 and GB/T 6038. The standard supersedes the 2006 edition HG/T 3870-2006.
HG/T 3870-2008 falls under ICS 83.060, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 2941
GB/T 6038
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 3870-2006 (earlier edition)
Standards on related subjects:
GB/T 2941-2025 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
GB/T 3511-2018 — Rubber, vulcanized or thermoplastic -- Resistance to weathering
GB/T 3512-2014 — Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests -- Air-oven method
HG/T 3867-2008 — Vulcanized rubber - Determination of low temperature resistance coefficient in tension
HG/T 3866-2008 — Vulcanized rubber - Determination of low temperature resistance coefficient in compression
HG/T 3863-2008 — Ebonite - Determination of crushing strength
6 Classification and status
International classification (ICS): 83.060
Chinese Standard Classification (CCS): G 40
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 3870
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3870-2008 | Vulcanized rubber - Determination of swelling index | current edition | Current |
| HG/T 3870-2006 | Vulcanized rubber - Determination of swelling index | previous edition | Superseded |
This page sells the current edition, HG/T 3870-2008. Earlier editions are listed for reference only.
How to Download HG/T 3870-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2941-1991 — Rubber-Standard temperatures, humidities and times for the conditioning environmental and testing of test pieces
GB/T 2941-2006 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
GB/T 2941-2025 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
HG/T 3870-2008
$55.00