HG/T 4903-2016Dynamically vulcanized thermoplastic elastomers (TPV) - Ethylene-propylene-diene rubber/polypropylene type (English PDF)
动态全硫化热塑性弹性体(TPV) 三元乙丙橡胶/聚丙烯型
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4903-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 15, 2016
Implementation date
July 1, 2016
Scope
HG/T 4903-2016 is the English-translated version of 动态全硫化热塑性弹性体(TPV) 三元乙丙橡胶/聚丙烯型.
HG/T 4903-2016 is the recommended Chinese chemical industry standard for dynamically fully vulcanized thermoplastic elastomer of the ethylene-propylene-diene rubber and polypropylene type, known as TPV.
It deals with the naming of the material, its technical requirements and the test methods that go with them, the inspection rules, and packaging, marking, storage and transport.
The material in question is EPDM/PP thermoplastic elastomer prepared by dynamic full vulcanization technology from EPDM and polypropylene as the main raw materials.
Testing follows quoted standards including GB/T 528-2009, GB/T 529-2008, GB/T 531.1, GB/T 1690, GB/T 3512, GB/T 7759-1996, GB 8410, GB/T 9352 and ISO 6452-2007. Issued on 15 January 2016, it has applied since 1 July 2016.
Found what you need?
Document preview — HG/T 4903-2016
National Standard of the People's Republic of China
- ICS
- 83.060
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 4903-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 January 2016 and has been in force since 1 July 2016.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for dynamically fully vulcanized thermoplastic elastomer of the ethylene-propylene-diene rubber and polypropylene type, known as TPV. It deals with the naming of the material, its technical requirements and the test methods that go with them, the inspection rules, and packaging, marking, storage and transport. The material in question is EPDM/PP thermoplastic elastomer prepared by dynamic full vulcanization technology from EPDM and polypropylene as the main raw materials. Testing follows quoted standards including GB/T 528-2009, GB/T 529-2008, GB/T 531.1, GB/T 1690, GB/T 3512, GB/T 7759-1996, GB 8410, GB/T 9352 and ISO 6452-2007.
HG/T 4903-2016 falls under ICS 83.060, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528-2009 — Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
GB/T 529-2008 — Rubber, vulcanized or thermoplastic -- Determination of tear strength (Trouser, angle and crescent test pieces)
GB/T 531.1
GB/T 533-2008 — Rubber, vulcanized or thermoplastic -- Determination of density
GB/T 1690
GB/T 2547
GB/T 2941
GB/T 3512
GB/T 6038
GB/T 7759-1996 — Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures
GB 8410
GB/T 9352
GB/T 25156
SH/T 1541
ISO 6452-2007
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 8655-2019 — Styrene-butadiene rubber (SBR)1500, 1502
GB/T 36089-2018 — Acrylonitrile-butadiene rubber(NBR)
GB/T 14647-2008 — Chloroprene rubber CR121, CR122
HG/T 5113-2016 — Thermoplastic elastomers - Styrenic compounds for wires and cables
HG/T 4849-2016 — Powdered nitrile butadiene rubber
HG/T 3316-2014 — Chloroprene rubber CR 244
6 Classification and status
International classification (ICS): 83.060
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528-2009Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 529-2008Rubber, vulcanized or thermoplastic -- Determination of tear strength (Trouser, angle and crescent test pieces)
- GB/T 531.1Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
- GB/T 533-2008Rubber, vulcanized or thermoplastic -- Determination of density
- GB/T 1690Rubber, vulcanized or thermoplastic—Determination of the effect of liquids
- GB/T 2547Plastics — Sampling methods
ISO 6452-2007
Similar standards
How to Download HG/T 4903-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 8410-1987 — Testing method of flammability of automotive interior materials
GB 8410-1994 — Flammability of automotive interior materials
GB 8410-2006 — Flammability of automotive interior materials
HG/T 4903-2016
$320.00