Valid

HG/T 3322-2012Rubber, vulcanized - Determination of tension set at a given elongation (modulus tester method) (English PDF)

硫化橡胶定伸永久变形的测定方法(模量测定器法)

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3322-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 24, 2012

Implementation date

November 1, 2012

Scope

HG/T 3322-2012 is the English-translated version of 硫化橡胶定伸永久变形的测定方法(模量测定器法).

HG/T 3322-2012 is the recommended Chinese chemical industry standard for the determination of tension set at a given elongation in vulcanized rubber, by the modulus tester method.

It describes how the permanent deformation left after a specimen has been held at a given elongation is measured on a modulus tester. The standard applies to vulcanized rubber in general and is not tied to any one product.

It quotes GB/T 528 and GB/T 2941. It replaces HG/T 3322-1981. Issued on 24 May 2012, it has applied since 1 November 2012.

Found what you need?

Document preview — HG/T 3322-2012

National Standard of the People's Republic of China

ICS
83.060
Replacing
HG/T 3322-1981

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 3.1 Category A
  • 3.2 Category B
  • 4 Classification and designation
  • 4.1 General
  • 4.2 Character group 1
  • 4.3 Character group 2
  • 4.4 Character group 3
  • 4.5 Character group 4
  • 4.6 Designation example
  • 5 Test Methods
  • 5.1 Appearance requirements
  • 5.2 Technical requirements
  • 5.3 Environmental requirements
  • 6.1 Test conditions
  • 6.2 Test substrate
  • 6.3 Apparatus
  • 6.4 Appearance
  • 6.5 Coating property
  • 6.6 Shear elongation
  • 6.7 Tensile shear strength
  • 6.8 Tensile bond strength
  • 6.9 Free formaldehyde
  • 7 Inspection rules
  • 7.1 Inspection
  • 7.2 Batching
  • 7.3 Sampling
  • 7.4 Judgment of inspection results
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage
  • 9 Packaging, transportation and storage

1 Foreword

HG/T 3322-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.

It replaces the earlier edition HG/T 3322-1981.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the recommended Chinese chemical industry standard for the determination of tension set at a given elongation in vulcanized rubber, by the modulus tester method. It describes how the permanent deformation left after a specimen has been held at a given elongation is measured on a modulus tester. The standard applies to vulcanized rubber in general and is not tied to any one product. It quotes GB/T 528 and GB/T 2941. It replaces HG/T 3322-1981.

HG/T 3322-2012 falls under ICS 83.060, in the field of rubber and plastics industries.

This catalogue holds 313 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 528

GB/T 2941

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 3322-1981 (earlier edition)

Standards on related subjects:

GB/T 2941-2025 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods

GB/T 3511-2018 — Rubber, vulcanized or thermoplastic -- Resistance to weathering

GB/T 3512-2014 — Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests -- Air-oven method

HG/T 2196-2026 — Standard classification system for rubber products in automotive application

HG/T 3321-2012 — Rubber, vulcanized - Determination of elastic modulus

HG/T 3323-2008 — Determination of viscosity of rubber cement (rotational viscometer method)

6 Classification and status

International classification (ICS): 83.060

Chinese Standard Classification (CCS): G 40

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3322

EditionTitleRevisionStatus
HG/T 3322-2012Rubber, vulcanized - Determination of tension set at a given elongation (modulus tester method)current editionCurrent
HG/T 3322-1981Rubber, vulcanized - Determination of tension set at a given elongation (modulus tester method)previous editionSuperseded

This page sells the current edition, HG/T 3322-2012. Earlier editions are listed for reference only.

How to Download HG/T 3322-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3322-2012

$110.00