HG/T 2448-2009Rubber threads (English PDF)
橡胶丝
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2448-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 4, 2009
Implementation date
June 1, 2010
Scope
HG/T 2448-2009 is the English-translated version of 橡胶丝.
HG/T 2448-2009 is a recommended standard of the Chinese chemical industry devoted to rubber threads. It classifies and marks the product and then sets the requirements, the test methods, the inspection rules and the provisions for marks, packaging, transport and storage.
Square-section rubber thread made from natural or synthetic rubber is what falls within its field of application. The standard quotes GB/T 528, GB/T 3512, HG/T 2487 and HG/T 3322, and was issued by the Ministry of Industry and Information Technology.
It supersedes HG/T 2448-1993. Issued on 4 December 2009, it has applied since 1 June 2010.
Found what you need?
Document preview — HG/T 2448-2009
National Standard of the People's Republic of China
- ICS
- 83.140.99
- Replacing
- HG/T 2448-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 2448-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 December 2009 and has been in force since 1 June 2010.
It replaces the earlier edition HG/T 2448-1993.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended standard of the Chinese chemical industry devoted to rubber threads. It classifies and marks the product and then sets the requirements, the test methods, the inspection rules and the provisions for marks, packaging, transport and storage. Square-section rubber thread made from natural or synthetic rubber is what falls within its field of application. The standard quotes GB/T 528, GB/T 3512, HG/T 2487 and HG/T 3322, and was issued by the Ministry of Industry and Information Technology. It supersedes HG/T 2448-1993.
HG/T 2448-2009 falls under ICS 83.140.99, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528-1998 — Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties [including MODIFICATION 1]
GB/T 3512-2001 — Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method
HG/T 2487-2003 — Rubber threads-Methods of test
HG/T 3322-1981 — Vulcanized rubber elongation measuring method of permanent deformation (modulus measuring method)
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2448-1993 (earlier edition)
Standards on related subjects:
GB/T 14833-2020 — Synthetic materials sports field surfaces
HG/T 4070-2008 — Silicone rubber sheets
GB/T 5574-2008 — Industrial rubber sheet
HG/T 6323-2024 — Two-piece can coloring rubber rollers
HG/T 2793-2023 — Conductive and antistatic rubber sheets for industrial use
HG/T 2446-2016 — Rubber rollers - Part 5: Rubber rollers for papermaking
6 Classification and status
International classification (ICS): 83.140.99
Chinese Standard Classification (CCS): G 47
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528-1998Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 3512-2001Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests in hot air
- HG/T 2487-2003Rubber thread - Test methods
- HG/T 3322-1981Rubber, vulcanized - Determination of tension set at a given elongation (modulus tester method)
Editions of HG/T 2448
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2448-2009 | Rubber threads | current edition | Current |
| HG/T 2448-1993 | Rubber threads | previous edition | Superseded |
This page sells the current edition, HG/T 2448-2009. Earlier editions are listed for reference only.
How to Download HG/T 2448-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3512-2001 — Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method
GB/T 528-1998 — Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties [including MODIFICATION 1]
HG/T 2487-2003 — Rubber threads-Methods of test
HG/T 2448-2009
$85.00