HG/T 3321-2012Rubber, vulcanized - Determination of elastic modulus (English PDF)
硫化橡胶弹性模量的测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3321-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
HG/T 3321-2012 is the English-translated version of 硫化橡胶弹性模量的测定方法.
HG/T 3321-2012 is the Chinese chemical industry standard for determining the elastic modulus of vulcanized rubber. It describes the method by which that modulus is measured and applies to vulcanized rubber generally, without restriction to a particular compound or product.
Its classification is G40 in the Chinese system and 83.060 internationally, among the general test methods for rubber. It is a recommended standard and quotes GB/T 528 and GB/T 2941.
It replaces the long-standing 1981 edition, HG/T 3321-1981. Issued on 24 May 2012, it has applied since 1 November 2012.
Found what you need?
Document preview — HG/T 3321-2012
National Standard of the People's Republic of China
- ICS
- 83.060
- Replacing
- HG/T 3321-1981
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 3321-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
It replaces the earlier edition HG/T 3321-1981.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the Chinese chemical industry standard for determining the elastic modulus of vulcanized rubber. It describes the method by which that modulus is measured and applies to vulcanized rubber generally, without restriction to a particular compound or product. Its classification is G40 in the Chinese system and 83.060 internationally, among the general test methods for rubber. It is a recommended standard and quotes GB/T 528 and GB/T 2941. It replaces the long-standing 1981 edition, HG/T 3321-1981.
HG/T 3321-2012 falls under ICS 83.060, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528
GB/T 2941
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 3321-1981 (earlier edition)
Standards on related subjects:
GB/T 2941-2025 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
GB/T 3511-2018 — Rubber, vulcanized or thermoplastic -- Resistance to weathering
GB/T 3512-2014 — Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests -- Air-oven method
HG/T 2196-2026 — Standard classification system for rubber products in automotive application
HG/T 3322-2012 — Rubber, vulcanized - Determination of tension set at a given elongation (modulus tester method)
HG/T 3323-2008 — Determination of viscosity of rubber cement (rotational viscometer method)
6 Classification and status
International classification (ICS): 83.060
Chinese Standard Classification (CCS): G 40
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 3321
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3321-2012 | Rubber, vulcanized - Determination of elastic modulus | current edition | Current |
| HG/T 3321-1981 | Rubber, vulcanized - Determination of elastic modulus | previous edition | Superseded |
This page sells the current edition, HG/T 3321-2012. Earlier editions are listed for reference only.
How to Download HG/T 3321-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2941-1991 — Rubber-Standard temperatures, humidities and times for the conditioning environmental and testing of test pieces
GB/T 2941-2006 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
GB/T 2941-2025 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
HG/T 3321-2012
$115.00