Valid

HG/T 3828-2006Waterborne wood coatings for interior use (English PDF)

室内用水性木器涂料

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3828-2006 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 26, 2006

Implementation date

March 1, 2007

Scope

HG/T 3828-2006 is the English-translated version of 室内用水性木器涂料.

HG/T 3828-2006 is the recommended Chinese chemical industry standard for waterborne wood coatings used indoors, that is, for paints applied to interior wooden substrates for decoration and protection.

It gives the definitions and the classification of these coatings, then their requirements, test methods, inspection rules, marking and packaging. Its scope takes in polyurethane, acrylic and acrylic-polyurethane products and other types, whether supplied as one-component coatings drying at room temperature or as two-component systems.

Among the many standards it quotes are GB 9278, GB/T 1766-1995, GB/T 9286-1998, GB/T 9750-1998 and GB/T 9755-2001. It is classified G51 in the Chinese system and 87.040 internationally. Issued on 26 July 2006, it has applied since 1 March 2007.

Found what you need?

Document preview — HG/T 3828-2006

National Standard of the People's Republic of China

ICS
87.040

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3828-2006 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 26 July 2006 and has been in force since 1 March 2007.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the recommended Chinese chemical industry standard for waterborne wood coatings used indoors, that is, for paints applied to interior wooden substrates for decoration and protection. It gives the definitions and the classification of these coatings, then their requirements, test methods, inspection rules, marking and packaging. Its scope takes in polyurethane, acrylic and acrylic-polyurethane products and other types, whether supplied as one-component coatings drying at room temperature or as two-component systems. Among the many standards it quotes are GB 9278, GB/T 1766-1995, GB/T 9286-1998, GB/T 9750-1998 and GB/T 9755-2001. It is classified G51 in the Chinese system and 87.040 internationally.

HG/T 3828-2006 falls under ICS 87.040, in the field of paint and colour industries.

This catalogue holds 140 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 1250

GB/T 1728-1979 (1989)

GB/T 1766-1995 — Paint and varnish--Rating schemes of degradation of coats

ISO 7784-2-1997

GB/T 4893.1-2005 — Furniture - Assessment of surface resistance to cold liquids

GB/T 4893.3-2005 — Furniture - Assessment of surface resistance to dry heat

GB/T 4893.9-1992 — Furniture--Test for surfaces--Assessment of resistance to impact

ISO 15184-1998

GB/T 6740

GB 9278

GB/T 9279

GB/T 9286-1998 — Paints and varnishes--Cross cut test for films

GB/T 9750-1998 — Marks for package of coating products

GB/T 9754

GB/T 9755-2001 — Synthetic resin emulsion coatings for exterior wall

GB/T 13491-1992 — General rule for packing of coatings

GB 1858

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

HJ 2537-2014 — Technical requirements for environmental labeling products - Water based coatings

HG/T 3952-2007 — Cathodic electrodeposition coatings

GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling

HG/T 4563-2025 — Non-stick coatings

HG/T 3950-2025 — Antimicrobial and antiviral coatings

HG/T 3830-2022 — Coil coatings

6 Classification and status

International classification (ICS): 87.040

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 3828-2006

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3828-2006

$115.00