Valid

HG/T 3330-2012Determination of breakdown strength of insulating varnish films (English PDF)

绝缘漆漆膜击穿强度测定法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3330-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

November 7, 2012

Implementation date

March 1, 2013

Scope

HG/T 3330-2012 is the English-translated version of 绝缘漆漆膜击穿强度测定法.

HG/T 3330-2012 is a recommended chemical industry standard of China setting out the method for the dielectric breakdown strength of a paint film. In the test an alternating voltage is raised on the film continuously and uniformly under defined conditions until breakdown occurs.

The method is intended for the breakdown strength of insulating paint films. Its classification places it with paints and varnishes, under the international code 87.040.

It draws on GB/T 3186, GB/T 6682, GB/T 9278, GB/T 13452.2 and HG/T 3855-2006. It supersedes HG/T 3330-1980, and, issued on 7 November 2012, it has applied since 1 March 2013.

Found what you need?

Document preview — HG/T 3330-2012

National Standard of the People's Republic of China

ICS
87.040
Replacing
HG/T 3330-1980

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3330-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2012 and has been in force since 1 March 2013.

It replaces the earlier edition HG/T 3330-1980.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended chemical industry standard of China setting out the method for the dielectric breakdown strength of a paint film. In the test an alternating voltage is raised on the film continuously and uniformly under defined conditions until breakdown occurs. The method is intended for the breakdown strength of insulating paint films. Its classification places it with paints and varnishes, under the international code 87.040. It draws on GB/T 3186, GB/T 6682, GB/T 9278, GB/T 13452.2 and HG/T 3855-2006. It supersedes HG/T 3330-1980, and,

HG/T 3330-2012 falls under ICS 87.040, in the field of paint and colour industries.

This catalogue holds 140 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 3186

GB/T 6682

GB/T 9278

GB/T 13452.2

HG/T 3855-2006 — Insulating varnishes - Preparation of films

4 Where this standard sits

It cites 5 standards, among them HG/T 3855-2006, listed in full above.

2 other standards in this catalogue cite it, among them HG/T 3371-2012, HG/T 3372-2012.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other editions:

HG/T 3330-2026 (later edition)

HG/T 3330-1980 (earlier edition)

Standards on related subjects:

GB/T 1865-2009 — Paints and varnishes -- Artificial weathering and exposure to artificial radiation -- Exposure to filtered xenon-arc radiation

GB/T 3181-2008 — Colour standard for paint film

GB/T 1771-2007 — Paints and Varnishes -- Determination of resistance to neutral salt spray (fog)

HG/T 4560-2013 — Coatings - Test method for anti-condensation performance

HG/T 3334-2012 — Electrophoretic coatings - General test methods

7 Classification and status

International classification (ICS): 87.040

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3330

EditionTitleRevisionStatus
HG/T 3330-2012Determination of breakdown strength of insulating varnish filmscurrent editionCurrent
HG/T 3330-1980Determination of breakdown strength of insulating varnish filmsprevious editionSuperseded

This page sells the current edition, HG/T 3330-2012. Earlier editions are listed for reference only.

How to Download HG/T 3330-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3330-2012

$115.00