HG/T 3035-2011Rubber hoses and hose assemblies for water suction and discharge - Specification (English PDF)
吸水和排水用橡胶软管及软管组合件 规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3035-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 3035-2011 is the English-translated version of 吸水和排水用橡胶软管及软管组合件 规范.
HG/T 3035-2011 is the recommended chemical industry standard for rubber hoses and hose assemblies used in water suction and discharge. It states the minimum requirements for fabric-reinforced, smooth-bore hoses of this kind and for the assemblies made from them.
Three types are covered, for conveying water at ambient temperatures from -25 °C to +70 °C, with the water itself between 0 °C and +70 °C. The standard is an identical adoption of ISO 4641-2005 and is used with GB/T 5564-2006, GB/T 5567-2006, GB/T 9575-2003 and ISO documents such as ISO 1402, ISO 4671 and ISO 8331.
It supersedes HG/T 3035-1999. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 3035-2011
National Standard of the People's Republic of China
- ICS
- 23.040.70
- Replacing
- HG/T 3035-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3035-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
It replaces the earlier edition HG/T 3035-1999.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended chemical industry standard for rubber hoses and hose assemblies used in water suction and discharge. It states the minimum requirements for fabric-reinforced, smooth-bore hoses of this kind and for the assemblies made from them. Three types are covered, for conveying water at ambient temperatures from -25 °C to +70 °C, with the water itself between 0 °C and +70 °C. The standard is an identical adoption of ISO 4641-2005 and is used with GB/T 5564-2006, GB/T 5567-2006, GB/T 9575-2003 and ISO documents such as ISO 1402, ISO 4671 and ISO 8331. It supersedes HG/T 3035-1999.
HG/T 3035-2011 falls under ICS 23.040.70, in the field of fluid systems and general-purpose components.
This catalogue holds 16 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 5564-2006 — Rubber and plastics hoses -- Sub ambient temperature flexibility tests
GB/T 5567-2006 — Rubber and plastics hoses and hose assemblies - Determination of suction resistance
GB/T 9575-2003 — Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length
ISO 37
ISO 188
ISO 1402
ISO 1746
ISO 2393
ISO 4671
ISO 7326-1991
ISO 8033
ISO 8330
ISO 8331
ISO/TR 17784
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 3035-1999 (earlier edition)
Standards on related subjects:
GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method
GB/T 2550-2016 — Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
HG/T 3041-2023 — Rubber hoses and hose assemblies for fuel delivery by tank truck
HG/T 3038-2023 — Rubber hoses and hose assemblies for oil suction and discharge - Specification
HG/T 3037-2019 — Rubber and plastics hoses and hose assemblies for measured fuel dispensing
6 Classification and status
International classification (ICS): 23.040.70
Chinese Standard Classification (CCS): G 42
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 5564-2006Rubber and plastics hoses -- Sub ambient temperature flexibility tests
- GB/T 5567-2006Rubber and plastics hoses and hose assemblies -- Determination of resistance to vacuum
- GB/T 9575-2003Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
ISO 37 · ISO 188 · ISO 1402 · ISO 1746 · ISO 2393 · ISO 4671 · ISO 7326-1991 · ISO 8033 · ISO 8330 · ISO 8331 · ISO/TR 17784
Similar standards
Editions of HG/T 3035
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3035-2011 | Rubber hoses and hose assemblies for water suction and discharge - Specification | current edition | Current |
| HG/T 3035-1999 | Rubber hoses and hose assemblies for water suction and discharge - Specification | previous edition | Superseded |
This page sells the current edition, HG/T 3035-2011. Earlier editions are listed for reference only.
How to Download HG/T 3035-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 5564-2006 — Rubber and plastics hoses -- Sub ambient temperature flexibility tests
GB/T 5567-2006 — Rubber and plastics hoses and hose assemblies - Determination of suction resistance
GB/T 9575-2003 — Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length
HG/T 3035-2011
$145.00