Valid

HG/T 2799-2011Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (English PDF)

吸引和低压排放石油液体用塑料软管及软管组合件 规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2799-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 2799-2011 is the English-translated version of 吸引和低压排放石油液体用塑料软管及软管组合件 规范.

HG/T 2799-2011 is the Chinese chemical industry standard for plastics hoses and hose assemblies used in the suction and low-pressure discharge of petroleum liquids.

It specifies two types of polymer-reinforced thermoplastic hose and hose assembly, intended for kerosene, heating oil, diesel fuel and lubricating oil over a temperature range of -10 °C to +45 °C. The text is an identical adoption of ISO 6808-1999.

Its requirements rest on GB/T 5564-2006 and on a set of ISO methods, among them ISO 176-1976, ISO 188, ISO 471, ISO 527-3, ISO 868, ISO 1307, ISO 1402, ISO 1817, ISO 7233 and ISO 8031.

It supersedes HG/T 2799-1996. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 2799-2011

National Standard of the People's Republic of China

ICS
75.200
Replacing
HG/T 2799-1996

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 2799-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

It replaces the earlier edition HG/T 2799-1996.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the Chinese chemical industry standard for plastics hoses and hose assemblies used in the suction and low-pressure discharge of petroleum liquids. It specifies two types of polymer-reinforced thermoplastic hose and hose assembly, intended for kerosene, heating oil, diesel fuel and lubricating oil over a temperature range of -10 °C to +45 °C. The text is an identical adoption of ISO 6808-1999. Its requirements rest on GB/T 5564-2006 and on a set of ISO methods, among them ISO 176-1976, ISO 188, ISO 471, ISO 527-3, ISO 868, ISO 1307, ISO 1402, ISO 1817, ISO 7233 and ISO 8031. It supersedes HG/T 2799-1996.

HG/T 2799-2011 falls under ICS 75.200, in the field of petroleum and related technologies.

This catalogue holds 4 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 5564-2006 — Rubber and plastics hoses -- Sub ambient temperature flexibility tests

ISO 3

ISO 176-1976

ISO 188

ISO 471

ISO 527-3

ISO 868

ISO 1307

ISO 1402

ISO 1746

ISO 1817

ISO 7233

ISO 8031

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 2799-1996 (earlier edition)

Standards on related subjects:

GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification

GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method

GB/T 2550-2016 — Gas welding equipment -- Rubber hoses for welding, cutting and allied processes

HG/T 6164.2-2026 — Large-diameter layflat rubber hose for fluid transmission-Specification - Part 2: Oil delivery hoses

HG/T 2805-2012 — Solid woven flame-retardant conveyor belts for underground coal mines

HG/T 2809-2009 — Seal installation for oil storaged tanks. Rubber seal belt

6 Classification and status

International classification (ICS): 75.200

Chinese Standard Classification (CCS): G 42

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 3 · ISO 176-1976 · ISO 188 · ISO 471 · ISO 527-3 · ISO 868 · ISO 1307 · ISO 1402 · ISO 1746 · ISO 1817 · ISO 7233 · ISO 8031

Similar standards

Editions of HG/T 2799

EditionTitleRevisionStatus
HG/T 2799-2011Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specificationcurrent editionCurrent
HG/T 2799-1996Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specificationprevious editionSuperseded

This page sells the current edition, HG/T 2799-2011. Earlier editions are listed for reference only.

How to Download HG/T 2799-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2799-2011

$180.00