HG/T 2819-2010Joined narrow V-belts (English PDF)
联组窄V带
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2819-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 22, 2010
Implementation date
March 1, 2011
Scope
HG/T 2819-2010 is the English-translated version of 联组窄V带.
Joined narrow V-belts are the subject of HG/T 2819-2010, a recommended standard issued for the Chinese chemical industry. It classifies these belts, describes their construction, and sets the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, storage and transport.
The belts it covers are meant for high-speed, high-power mechanical drives, and the standard states that they serve equally for ordinary power transmission. Dimensional and performance work follows GB/T 3686, GB/T 3688, GB/T 12730, GB/T 13490 and GB/T 17200.
It supersedes the earlier banded narrow V-belt edition HG/T 2819-1996. Issued on 22 November 2010, it has applied since 1 March 2011.
Found what you need?
Document preview — HG/T 2819-2010
National Standard of the People's Republic of China
- ICS
- 53.090.20
- Replacing
- HG/T 2819-1996
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2819-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 November 2010 and has been in force since 1 March 2011.
It replaces the earlier edition HG/T 2819-1996.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Joined narrow V-belts are the subject of HG/T 2819-2010, a recommended standard issued for the Chinese chemical industry. It classifies these belts, describes their construction, and sets the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, storage and transport. The belts it covers are meant for high-speed, high-power mechanical drives, and the standard states that they serve equally for ordinary power transmission. Dimensional and performance work follows GB/T 3686, GB/T 3688, GB/T 12730, GB/T 13490 and GB/T 17200. It supersedes the earlier banded narrow V-belt edition HG/T 2819-1996.
HG/T 2819-2010 falls under ICS 53.090.20, in the field of materials handling equipment.
This catalogue holds 18 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 3686
GB/T 3688
GB/T 12730
GB/T 13490
GB/T 17200
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2819-1996 (earlier edition)
Standards on related subjects:
GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method
GB/T 2550-2016 — Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
HG/T 2014-2025 — Acoustics - Hearing protectors - Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects
HG/T 3047-2024 — Determination of air permeability of rubber or plastic coated fabrics
HG/T 2809-2009 — Seal installation for oil storaged tanks. Rubber seal belt
6 Classification and status
International classification (ICS): 53.090.20
Chinese Standard Classification (CCS): G 42
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3686Belt drives - V-belts and V-ribbed belts - Tensile strength and elongation test method
- GB/T 3688Test method for adhesion performance of V-belt cords
- GB/T 12730Narrow V-belt for general drive
- GB/T 13490V-belts -- Uniformity of belts -- Test method for determination of centre distance variation
- GB/T 17200Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of traverse)
Similar standards
Editions of HG/T 2819
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2819-2010 | Joined narrow V-belts | current edition | Current |
| HG/T 2819-1996 | Joined narrow V-belts | previous edition | Superseded |
This page sells the current edition, HG/T 2819-2010. Earlier editions are listed for reference only.
How to Download HG/T 2819-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 2819-2010
$90.00