HG/T 2647-2011Length measuring machines for classical and narrow V-belts - Technical specifications (English PDF)
普通V带和窄V带测长机技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2647-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 2647-2011 is the English-translated version of 普通V带和窄V带测长机技术条件.
Length measuring machines for classical and narrow V-belts are the subject of HG/T 2647-2011, a recommended standard of the Chinese chemical industry. It lays down the basic structure of the machine, its requirements, the testing to be carried out, the inspection rules and the rules for marking, packaging, transport and storage.
Machines of this kind measure the length of classical and narrow V-belts and also the exposed height of narrow V-belts. The standard cites GB/T 1184, GB/T 1958, GB/T 11356.2, GB/T 13575.1, GB/T 13575.2 and HG/T 2382.
It supersedes HG/T 2647-1994. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 2647-2011
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 2647-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2647-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
It replaces the earlier edition HG/T 2647-1994.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Length measuring machines for classical and narrow V-belts are the subject of HG/T 2647-2011, a recommended standard of the Chinese chemical industry. It lays down the basic structure of the machine, its requirements, the testing to be carried out, the inspection rules and the rules for marking, packaging, transport and storage. Machines of this kind measure the length of classical and narrow V-belts and also the exposed height of narrow V-belts. The standard cites GB/T 1184, GB/T 1958, GB/T 11356.2, GB/T 13575.1, GB/T 13575.2 and HG/T 2382. It supersedes HG/T 2647-1994.
HG/T 2647-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1184
GB/T 1958
GB/T 11356.2
GB/T 13575.1
GB/T 13575.2
HG/T 2382
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2647-1994 (earlier edition)
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy
HG/T 2648-2011 — Conveyor belt drum friction testing machines - Technical specifications
HG/T 2645-2011 — Special cutting dies for rubber - Technical specifications
HG/T 2644-2011 — Pusey and Jones (P&J) hardness testers for rubber rollers - Technical specifications
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 98
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1958Geometrical Product Specifications(GPS)—Geometrical tolerance—Verification
- GB/T 11356.2Belt drives - Geometrical inspection of grooves for classical and narrow V-Pulleys - Part 2: System based on effective width
- GB/T 13575.1Classical and narrow V-belt drivesPart 1: System based on datum width
- GB/T 13575.2Classical and narrow V-belt drives - Part 2: Effective system
- HG/T 2382General technical requirements for rubber testing instruments and equipment
Similar standards
Editions of HG/T 2647
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2647-2011 | Length measuring machines for classical and narrow V-belts - Technical specifications | current edition | Current |
| HG/T 2647-1994 | Length measuring machines for classical and narrow V-belts - Technical specifications | previous edition | Superseded |
This page sells the current edition, HG/T 2647-2011. Earlier editions are listed for reference only.
How to Download HG/T 2647-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11356.2-1997 — Belt drives. Pulley for classical and narrow V-belts drives (system based on effective width). Geometrical inspection of groove
GB/T 11356.2-2023 — Belt drives - Geometrical inspection of grooves for classical and narrow V-Pulleys - Part 2: System based on effective width
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
HG/T 2647-2011
$105.00