HG/T 2186-2012Tyres - Test method for water pressure (English PDF)
轮胎水压试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2186-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
HG/T 2186-2012 is the English-translated version of 轮胎水压试验方法.
HG/T 2186-2012 is the Chinese chemical industry standard that sets out the water pressure test for tyres. It gives the terms and definitions, the principle of the test, the test equipment, the procedure to be followed, the formulas used in the calculation and the content of the test report.
The method is written for passenger car tyres, truck tyres, agricultural tyres, off-the-road tyres and industrial tyres. Terminology follows GB/T 6326. The standard replaces HG/T 2186-1991 and is classified under CCS G41 and ICS 83.160.01. Issued on 24 May 2012, it has applied since 1 November 2012.
Found what you need?
Document preview — HG/T 2186-2012
National Standard of the People's Republic of China
- ICS
- 83.160.01
- Replacing
- HG/T 2186-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 2186-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
It replaces the earlier edition HG/T 2186-1991.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the Chinese chemical industry standard that sets out the water pressure test for tyres. It gives the terms and definitions, the principle of the test, the test equipment, the procedure to be followed, the formulas used in the calculation and the content of the test report. The method is written for passenger car tyres, truck tyres, agricultural tyres, off-the-road tyres and industrial tyres. Terminology follows GB/T 6326. The standard replaces HG/T 2186-1991 and is classified under CCS G41 and ICS 83.160.01.
HG/T 2186-2012 falls under ICS 83.160.01, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 6326
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2186-1991 (earlier edition)
Standards on related subjects:
GB/T 1703-2017 — Cycle inner tubes
GB/T 1796.3-2017 — Tyre valves -- Part 3: Snap-in valves
HG/T 2177-2011 — Tyres - Appearance quality
HG/T 6345-2025 — Requirements of the greenhouse gas emissions accounting and reporting - Tyre production enterprise
HG/T 2195-2013 — Aircraft tyres - Use and maintenance
6 Classification and status
International classification (ICS): 83.160.01
Chinese Standard Classification (CCS): G 41
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of HG/T 2186
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2186-2012 | Tyres - Test method for water pressure | current edition | Current |
| HG/T 2186-1991 | Tyres - Test method for water pressure | previous edition | Superseded |
This page sells the current edition, HG/T 2186-2012. Earlier editions are listed for reference only.
How to Download HG/T 2186-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 2186-2012
$115.00