Valid

HG/T 2145.2-2015Glass-lined handholes with sight glass (English PDF)

搪玻璃带视镜手孔

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2145.2-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 14, 2015

Implementation date

January 1, 2016

Scope

HG/T 2145.2-2015 is the English-translated version of 搪玻璃带视镜手孔.

HG/T 2145.2-2015 is Part 2 of the recommended Chinese chemical industry standard on handholes for glass-lined vessels, and it covers the bolted handhole fitted with a sight glass.

The part sets the types, basic parameters and dimensions of the fitting, the technical requirements it must satisfy, and the works documentation, packaging, transport and storage that go with it.

It is written for handholes with sight glass on glass-lined equipment of nominal pressure no greater than PN10 and design temperature above -20 °C up to 200 °C. It is used with GB/T 70.1, GB/T 898, GB/T 1804, GB/T 5782, GB/T 6170, GB/T 23259, GB/T 25025, HG/T 2050, HG/T 2105, HG/T 20606, HG/T 20614 and HG/T 20660.

It replaces HG/T 2145.2-2009. Issued on 14 July 2015, it has applied since 1 January 2016.

Found what you need?

Document preview — HG/T 2145.2-2015

National Standard of the People's Republic of China

ICS
25.220.50
Replacing
HG/T 2145.2-2009

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 2145.2-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.

It replaces the earlier edition HG/T 2145.2-2009, HG/T 2145.2-1991.

It is one of 10 parts of the HG/T 2145 series.

2 Scope Preview

This standard is Part 2 of the recommended Chinese chemical industry standard on handholes for glass-lined vessels, and it covers the bolted handhole fitted with a sight glass. The part sets the types, basic parameters and dimensions of the fitting, the technical requirements it must satisfy, and the works documentation, packaging, transport and storage that go with it. It is written for handholes with sight glass on glass-lined equipment of nominal pressure no greater than PN10 and design temperature above -20 °C up to 200 °C. It is used with GB/T 70.1, GB/T 898, GB/T 1804, GB/T 5782, GB/T 6170, GB/T 23259, GB/T 25025, HG/T 2050, HG/T 2105, HG/T 20606, HG/T 20614 and HG/T 20660. It replaces HG/T 2145.2-2009.

HG/T 2145.2-2015 falls under ICS 25.220.50, in the field of manufacturing engineering.

This catalogue holds 8 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 70.1

GB/T 898

GB/T 1804

GB/T 5782

GB/T 6170

GB/T 23259

GB/T 25025

HG/T 2050

HG/T 2105

HG/T 20606

HG/T 20614

HG/T 20660

4 Where this standard sits

It cites 12 standards, listed in full above.

It is one part of the HG/T 2145 series, of which this catalogue holds 10 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

HG/T 2145.1-1991 — Glass-lined hand-well flat hand hole cover

HG/T 2145.1-2009 — Handhole for glass lined steel vessel

HG/T 2145.1-2015 — Glass-lined flat cover handholes

HG/T 2145.3-1991 — Glass-lined hand hole quick open hand hole

HG/T 2145.3-2009 — Quick-opening handhole for glass lined steel vessel

HG/T 2145.3-2015 — Glass-lined quick-opening handholes

HG/T 2145.4-1991 — Glass-lined hand hole with endoscopic quick open hand hole

HG/T 2145.4-2009 — Quick-opening handhole with glass sight for glass lined steel vessel

HG/T 2145.4-2015 — Glass-lined quick-opening handholes with sight glass

Other editions:

HG/T 2145.2-2009 (earlier edition)

HG/T 2145.2-1991 (earlier edition)

Standards on related subjects:

GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment

GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing

HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy

7 Classification and status

International classification (ICS): 25.220.50

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 2145.2

EditionTitleRevisionStatus
HG/T 2145.2-2015Glass-lined handholes with sight glasscurrent editionCurrent
HG/T 2145.2-2009Glass-lined handholes with sight glassprevious editionSuperseded

This page sells the current edition, HG/T 2145.2-2015. Earlier editions are listed for reference only.

How to Download HG/T 2145.2-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2145.2-2015

$95.00