HG/T 2145.4-2015Glass-lined quick-opening handholes with sight glass (English PDF)
搪玻璃带视镜快开手孔
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2145.4-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 14, 2015
Implementation date
January 1, 2016
Scope
HG/T 2145.4-2015 is the English-translated version of 搪玻璃带视镜快开手孔.
HG/T 2145.4-2015 is Part 4 of the recommended Chinese chemical industry standard on handholes for glass-lined vessels, and it covers the quick-opening handhole fitted with a sight glass.
It gives the types, basic parameters and dimensions of the fitting, its technical requirements, and the works documentation, packaging, transport and storage that accompany delivery.
It applies to quick-opening handholes with sight glass on glass-lined equipment of nominal pressure not greater than PN10 and design temperature above -20 °C and up to 200 °C. Fasteners, pins and tolerances are taken from GB/T 70.1, GB/T 91, GB/T 882, GB/T 898, GB/T 1804, GB/T 6170 and GB/T 23259, with GB 25025, HG/T 2050, HG/T 2054, HG/T 20606, HG/T 20614 and HG/T 20660 cited too.
It replaces HG/T 2145.4-2009. Issued on 14 July 2015, it has applied since 1 January 2016.
Found what you need?
Document preview — HG/T 2145.4-2015
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 2145.4-2009
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2145.4-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.
It replaces the earlier edition HG/T 2145.4-2009, HG/T 2145.4-1991.
It is one of 10 parts of the HG/T 2145 series.
2 Scope Preview
This standard is Part 4 of the recommended Chinese chemical industry standard on handholes for glass-lined vessels, and it covers the quick-opening handhole fitted with a sight glass. It gives the types, basic parameters and dimensions of the fitting, its technical requirements, and the works documentation, packaging, transport and storage that accompany delivery. It applies to quick-opening handholes with sight glass on glass-lined equipment of nominal pressure not greater than PN10 and design temperature above -20 °C and up to 200 °C. Fasteners, pins and tolerances are taken from GB/T 70.1, GB/T 91, GB/T 882, GB/T 898, GB/T 1804, GB/T 6170 and GB/T 23259, with GB 25025, HG/T 2050, HG/T 2054, HG/T 20606, HG/T 20614 and HG/T 20660 cited too. It replaces HG/T 2145.4-2009.
HG/T 2145.4-2015 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 70.1
GB/T 91
GB/T 882
GB/T 898
GB/T 1804
GB/T 6170
GB/T 23259
GB 25025
HG/T 2050
HG/T 2054
HG/T 20606
HG/T 20614
HG/T 20660
4 Where this standard sits
It cites 13 standards, listed in full above.
It is one part of the HG/T 2145 series, of which this catalogue holds 10 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
HG/T 2145.1-1991 — Glass-lined hand-well flat hand hole cover
HG/T 2145.1-2009 — Handhole for glass lined steel vessel
HG/T 2145.1-2015 — Glass-lined flat cover handholes
HG/T 2145.2-1991 — Glass-lined hand hole with endoscopic hand hole
HG/T 2145.2-2009 — Handhole with glass sight for glass lined steel vessel
HG/T 2145.2-2015 — Glass-lined handholes with sight glass
HG/T 2145.3-1991 — Glass-lined hand hole quick open hand hole
HG/T 2145.3-2009 — Quick-opening handhole for glass lined steel vessel
HG/T 2145.3-2015 — Glass-lined quick-opening handholes
Other editions:
HG/T 2145.4-2009 (earlier edition)
HG/T 2145.4-1991 (earlier edition)
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy
7 Classification and status
International classification (ICS): 71.120
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
Editions of HG/T 2145.4
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2145.4-2015 | Glass-lined quick-opening handholes with sight glass | current edition | Current |
| HG/T 2145.4-2009 | Glass-lined quick-opening handholes with sight glass | previous edition | Superseded |
This page sells the current edition, HG/T 2145.4-2015. Earlier editions are listed for reference only.
How to Download HG/T 2145.4-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 25025-2010 — Specification of glass-lined equipment for industry
GB/T 1804-1992 — General tolerances. Tolerances for linear dimensions without individual tolerance indications
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
HG/T 2145.4-2015
$125.00