HG/T 2145.1-2015Glass-lined flat cover handholes (English PDF)
搪玻璃平盖手孔
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2145.1-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 14, 2015
Implementation date
January 1, 2016
Scope
HG/T 2145.1-2015 is the English-translated version of 搪玻璃平盖手孔.
HG/T 2145.1-2015 opens the recommended Chinese chemical industry series on handholes for glass-lined vessels, its first part being the flat cover handhole.
It specifies the type of the flat handhole cover used on glass-lined equipment, its basic parameters and dimensions, its technical requirements, and the works documentation, packaging, transport and storage that accompany it.
The part applies to flat cover handholes on glass-lined equipment of nominal pressure not greater than PN10 whose design temperature is above -20 °C and no more than 200 °C. Six documents are called up with it: GB/T 1804, GB/T 5782, GB/T 6170, GB 25025, HG/T 2050 and HG/T 2105.
It takes the place of HG/T 2145.1-2009. Issued on 14 July 2015, it has applied since 1 January 2016.
Found what you need?
Document preview — HG/T 2145.1-2015
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 2145.1-2009
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2145.1-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.
It replaces the earlier edition HG/T 2145.1-2009, HG/T 2145.1-1991.
It is one of 10 parts of the HG/T 2145 series.
2 Scope Preview
HG/T 2145.1-2015 opens the recommended Chinese chemical industry series on handholes for glass-lined vessels, its first part being the flat cover handhole. It specifies the type of the flat handhole cover used on glass-lined equipment, its basic parameters and dimensions, its technical requirements, and the works documentation, packaging, transport and storage that accompany it. The part applies to flat cover handholes on glass-lined equipment of nominal pressure not greater than PN10 whose design temperature is above -20 °C and no more than 200 °C. Six documents are called up with it: GB/T 1804, GB/T 5782, GB/T 6170, GB 25025, HG/T 2050 and HG/T 2105. It takes the place of HG/T 2145.1-2009.
HG/T 2145.1-2015 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1804
GB/T 5782
GB/T 6170
GB 25025
HG/T 2050
HG/T 2105
4 Where this standard sits
It cites 6 standards, listed in full above.
It is one part of the HG/T 2145 series, of which this catalogue holds 10 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
HG/T 2145.2-1991 — Glass-lined hand hole with endoscopic hand hole
HG/T 2145.2-2009 — Handhole with glass sight for glass lined steel vessel
HG/T 2145.2-2015 — Glass-lined handholes with sight glass
HG/T 2145.3-1991 — Glass-lined hand hole quick open hand hole
HG/T 2145.3-2009 — Quick-opening handhole for glass lined steel vessel
HG/T 2145.3-2015 — Glass-lined quick-opening handholes
HG/T 2145.4-1991 — Glass-lined hand hole with endoscopic quick open hand hole
HG/T 2145.4-2009 — Quick-opening handhole with glass sight for glass lined steel vessel
HG/T 2145.4-2015 — Glass-lined quick-opening handholes with sight glass
Other editions:
HG/T 2145.1-2009 (earlier edition)
HG/T 2145.1-1991 (earlier edition)
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy
7 Classification and status
International classification (ICS): 71.120
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1804General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 5782Fasteners—Hexagon head bolts
- GB/T 6170Hexagon nuts, style 1
- GB 25025Specification of glass-lined equipment for industry
- HG/T 2050Glass-lined equipment - Gaskets
- HG/T 2105Glass-lined equipment - Loose flanges
Similar standards
Editions of HG/T 2145.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2145.1-2015 | Glass-lined flat cover handholes | current edition | Current |
| HG/T 2145.1-2009 | Glass-lined flat cover handholes | previous edition | Superseded |
This page sells the current edition, HG/T 2145.1-2015. Earlier editions are listed for reference only.
How to Download HG/T 2145.1-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 25025-2010 — Specification of glass-lined equipment for industry
GB/T 1804-1992 — General tolerances. Tolerances for linear dimensions without individual tolerance indications
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
HG/T 2145.1-2015
$75.00