HG/T 20273-2011Technical code for coating engineering of spray polyurea protective materials (English PDF)
喷涂型聚脲防护材料涂装工程技术规范
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for HG/T 20273-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
HG/T 20273-2011 is the English-translated version of 喷涂型聚脲防护材料涂装工程技术规范.
HG/T 20273-2011 is the recommended chemical industry standard of China that lays down the technical code for coating engineering with sprayed polyurea protective materials.
It governs the design, the basic construction requirements and the quality acceptance of polyurea protection work on chemical plant installations.
The text deals with the requirements placed on raw materials and coatings used in a sprayed polyurea protection scheme, with design and construction provisions, with safety and environmental protection during application, and with inspection and acceptance of the finished work.
It quotes GB 50209, GB 50212 and GB 50046, and with test methods including GB/T 16777, GB/T 528, GB/T 5210 and GB/T 1408.1, as well as HG/T 3831 and HG/T 3343. Issued on 18 May 2011, it has applied since 1 August 2011.
Found what you need?
Document preview — HG/T 20273-2011
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 20273-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 22 pages in English translation.
2 Scope Preview
This standard is the recommended chemical industry standard of China that lays down the technical code for coating engineering with sprayed polyurea protective materials. It governs the design, the basic construction requirements and the quality acceptance of polyurea protection work on chemical plant installations. The text deals with the requirements placed on raw materials and coatings used in a sprayed polyurea protection scheme, with design and construction provisions, with safety and environmental protection during application, and with inspection and acceptance of the finished work. It quotes GB 50209, GB 50212 and GB 50046, and with test methods including GB/T 16777, GB/T 528, GB/T 5210 and GB/T 1408.1, as well as HG/T 3831 and HG/T 3343.
HG/T 20273-2011 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,683 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 Normative references
GB 50209
GB 50212
GB 50046
GB/T 1725
GB/T 533
GB/T 1723
GB/T 531.1
GB/T 528
GB/T 529
GB/T 16777
GB/T 1771
GB/T 1408.1
GB/T 9274
GB/T 5210
HG/T 3831
HG/T 3343
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 22 pages
5 Related standards
Standards on related subjects:
JB 2293-1978 — Wind tunnel test method of radiator of automobile and tractor
HG/T 20718-2020 — Code for design of double-row curtain retaining structures with pressure relief for foundation pits
HG/T 20716-2020 — Technical specification for offshore cone penetration testing
HG/T 20722-2019 — Contents and in-depth regulations on the feasibility study report of the rubber plant construction project
6 Classification and status
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 50209Code for Acceptance of Construction Quality of Building Ground
- GB 50212Specification for construction and acceptance of anticorrosive engineering of buildings
- GB 50046Code for Anticorrosion Design of Industrial Constructions
- GB/T 1725Paints, varnishes and plastics -- Determination of non-volatile-matter content
- GB/T 533Rubber, vulcanized or thermoplastic -- Determination of density
- GB/T 1723Determination of viscosity of coatings
Similar standards
How to Download HG/T 20273-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 50046-1995 — Code for anticorrosion design of industrial construction
GB 50046-2008 — Code for Anticorrosion Design of Industrial Constructions
GB 50209-1995 — Code for construction and acceptance of building ground engineering
HG/T 20273-2011
$385.00