HG 30013-2013Safety code for work at height in production areas (English PDF)
生产区域高处作业安全规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG 30013-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Mandatory
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
HG 30013-2013 is the English-translated version of 生产区域高处作业安全规范.
HG 30013-2013 is the Chinese standard "Safety code for work at height in production areas". Its scope clause reads: This standard specifies the chemical industry high job classification and grading, safety requirements and protection and "high security job card" (hereinafter referred to as "job card") management.
Found what you need?
Document preview — HG 30013-2013
National Standard of the People's Republic of China
- Replacing
- HG 23014-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
1 Scope
This standard specifies the chemical industry high job classification and grading, safety requirements and protection and "high security job card" (hereinafter referred to as "job card") management.
Foreword
This document was issued on 31 December 2013 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 July 2014.
It replaces HG 23014-1999.
The document is under the responsibility of the Ministry of Industry and Information Technology.
About this edition
HG 30013-2013 is the current edition. It was issued on 31 December 2013 and has been in force since 1 July 2014, replacing HG 23014-1999.
HG 23014-1999 has been superseded: a specification that still cites it is citing a withdrawn edition.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.
Edition history and citation
HG 30013-2013 replaces HG 23014-1999. A specification, drawing or test report that cites the older number is pointing at a document that is no longer the one in force, and the two editions can differ in requirements, in test methods or in scope.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
HG 30013-2013 carries no ICS number in the official record.
The HG prefix without a suffix marks a mandatory standard of China's chemical industry, issued by the Ministry of Industry and Information Technology: within its scope, compliance is required.
The document is under the responsibility of the Ministry of Industry and Information Technology, which is the body that maintains it and that will answer a formal question about its interpretation.
How this standard is designated
The full designation is HG 30013-2013. A citation should carry the number with its year, because the year identifies the text that applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- HG/T 30021-2014Technical specification for production safety of reactive black KN-8BG (C.I. Reactive Black 5)
- HG/T 30022-2014Technical specification for production safety of disperse orange S-4RL (C.I. Disperse Orange 30)
- GB 26148-2010Safety specification for the use of manually operated high pressure waterjet equipment
Similar standards
Editions of HG 30013
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG 30013-2013 | Safety code for work at height in production areas | current edition | Current |
| HG 23014-1999 | Safety code for work at height in production areas | previous edition | Superseded |
This page sells the current edition, HG 30013-2013. Earlier editions are listed for reference only.
How to Download HG 30013-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HG 20226-2015 — Code for construction and acceptance of tubular furnace installation works
HG 20202-2014 — Code for construction and acceptance of degreasing project
HG 20231-2014 — Code for project commissioning in chemical industry
HG 30013-2013
$105.00