Valid

HG 30010-2013Safety code for hot work in production areas (English PDF)

生产区域动火作业安全规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG 30010-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Mandatory

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

HG 30010-2013 is the English-translated version of 生产区域动火作业安全规范.

HG 30010-2013 is the Chinese standard "Safety code for hot work in production areas".

Its scope clause reads: This standard specifies the chemical companies producing hot work area classification, hot work safety requirements, eligibility criteria and flare analysis and "hot work permit safe operation" (hereinafter referred to as "job card") for management.

Found what you need?

Document preview — HG 30010-2013

National Standard of the People's Republic of China

Replacing
HG 23011-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope

1 Scope

This standard specifies the chemical companies producing hot work area classification, hot work safety requirements, eligibility criteria and flare analysis and "hot work permit safe operation" (hereinafter referred to as "job card") for management.

Foreword

This document was issued on 31 December 2013 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 July 2014.

It replaces HG 23011-1999.

The document is under the responsibility of the Ministry of Industry and Information Technology.

About this edition

HG 30010-2013 is the current edition. It was issued on 31 December 2013 and has been in force since 1 July 2014, replacing HG 23011-1999.

HG 23011-1999 has been superseded: a specification that still cites it is citing a withdrawn edition.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

HG 30010-2013 replaces HG 23011-1999. A specification, drawing or test report that cites the older number is pointing at a document that is no longer the one in force, and the two editions can differ in requirements, in test methods or in scope.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

HG 30010-2013 carries no ICS number in the official record.

The HG prefix without a suffix marks a mandatory standard of China's chemical industry, issued by the Ministry of Industry and Information Technology: within its scope, compliance is required.

The document is under the responsibility of the Ministry of Industry and Information Technology, which is the body that maintains it and that will answer a formal question about its interpretation.

How this standard is designated

The full designation is HG 30010-2013. A citation should carry the number with its year, because the year identifies the text that applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG 30010

EditionTitleRevisionStatus
HG 30010-2013Safety code for hot work in production areascurrent editionCurrent
HG 23011-1999Safety code for hot work in production areasprevious editionSuperseded

This page sells the current edition, HG 30010-2013. Earlier editions are listed for reference only.

How to Download HG 30010-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG 30010-2013

$85.00