HG 30014-2013Safety code for lifting work in production areas (English PDF)
生产区域吊装作业安全规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG 30014-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Mandatory
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
HG 30014-2013 is the English-translated version of 生产区域吊装作业安全规范.
HG 30014-2013 is the Chinese chemical industry standard covering safety code for lifting work in production areas. It was issued on 31 December 2013 and has been in force since 1 July 2014, replacing HG 23015-1999.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2013 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — HG 30014-2013
National Standard of the People's Republic of China
- Replacing
- HG 23015-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 General Provisions
- 1.1 Pursuant Laws and Regulations
- 1.2 Scope
- 1.3 Design and Manufacturing Organization
- 1.4 Definitions
- 1.5 Load
- 1.6 Thickness
- 1.7 Permissible Stress
- 1.8 Pressure Test and Compactness Test
- 2 Terms
- 2.1 General Requirements of Materials
- 2.2 Grey Cast Iron
- 2.3 Spheroidal Graphite Cast Iron
- 2.4 Malleable Cast Iron
- 2.5 Corrosion Resistant High Silicon Cast Iron
- 2.6 Heat Resistant Cast Iron
- 2.7 Carbon Cast Steel and Acid-Resistant Stainless Cast Steel
- 2.8 Heat-Resistant Cast Steel
- 3 Basic requirements
- 3.1 General Principles
- 3.2 Calculation of Tower Vessel
- 3.3 Calculation of Shells under External Pressure
- 4 Degreasing of equipment
- 4.1 General Principle and Precautions for Structural Design
- 4.2 Characteristics of Structural Design of Different Cast Materials
- 4.3 Design of Cast Node
- 4.4 Structure Design for Casting Vessel Parts
- 4.5 Structural Design of Tower Vessel
- 4.6 Prevention against accidental injuries such as mechanical injury and falling
- 5 Degreasing of pipeline and pipeline components
- 5.1 Static Equipment and Pipeline System
- 5.2 Electrical System
- 5.3 Instruments and Control System
- 5.4 Rotating Equipment/Machinery Run-in
- 5.5 Furnace Drying
- 5.6 Repair of Casting Defect
- 5.7 General Requirements for Inspection
- 5.9 Destructive Test of Hydraulic Pressure for Cast Iron Vessel
- 6 Degreasing of instruments and instrument components
- 6.1 General Requirements for Cold Commissioning
- 6.2 Simulation Running of Unit or System
- 6.3 Boiling out of Steam Generator
- 6.4 Passivation of Equipment and Pipeline System
- 6.5 Filling of Catalyst, Molecular Sieve, Resin and Desiccant
- 6.6 Tightness Test of Process System
- 7 Inspection
- 7.1 Safety and hygiene management institutions and personnel quota
- 7.2 Safety and hygiene monitoring institutions
- 7.3 Gas protection station
- 7.4 Fire station
- 7.5 Establishment of occupational disease prevention and control institutions
- 8 Safety technology
- 9 Division of Responsibilities
1 Foreword
HG 30014-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
The HG prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.
The document runs to 15 pages in English translation.
2 Scope Preview
HG 30014-2013 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 550 other HG standards.
Of the 114 HG standards that do carry an ICS number, 42 (37%) fall under ICS 65, in the field of agriculture.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Standards on related subjects:
GB 19041-2024 — Safety specifications for the production of phosgene and phosgenation products
GB/T 35925-2018 — Determination of impurity fluorine ion in water soluble chemicals—Ion chromatography method
HG/T 3811-2006 — Bromides for industrial use - Test methods
HG/T 30023-2016 — Safety technical specification for production of low-carbon aliphatic amines
HG 20571-2014 — Code for safety and hygiene design of chemical enterprise
HG 30016-2013 — Safety code for excavation work in production areas
5 Classification and status
Prefix HG: mandatory standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG 30014
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG 30014-2013 | Safety code for lifting work in production areas | current edition | Current |
| HG 23015-1999 | Safety code for lifting work in production areas | previous edition | Superseded |
This page sells the current edition, HG 30014-2013. Earlier editions are listed for reference only.
How to Download HG 30014-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HG 20226-2015 — Code for construction and acceptance of tubular furnace installation works
HG 20202-2014 — Code for construction and acceptance of degreasing project
HG 20231-2014 — Code for project commissioning in chemical industry
HG 30014-2013
$85.00