Valid

GB/Z 32582-2016Environmental standardization for electrical and electronic products and systems - Standardization of environmental aspects - Glossary of terms (English PDF)

电子电气产品与系统环境标准化 环境因素标准化 术语

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/Z 32582-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 25, 2016

Implementation date

April 25, 2016

Scope

GB/Z 32582-2016 is the English-translated version of 电子电气产品与系统环境标准化 环境因素标准化 术语.

GB/Z 32582-2016 is a Chinese glossary of terms for the environmental standardization of electrical and electronic products and systems, adopted with modifications from IEC 62542.

Its entries follow the product life cycle and fall into four groups: general terms on environmental protection and management, terms on materials, substance declaration and testing, terms on energy efficiency and power consumption, and terms on resource conservation and reuse.

The topics reach design and supply chain, material use, analysis methods, climate change, environmental information and end-of-life treatment. An informative annex explains power requirements and equipment operating modes, and a pinyin index was added.

Committees drafting or revising standards on environmental aspects of electrical and electronic products use it as their common vocabulary. It was issued on 25 April 2016.

Found what you need?

Document preview — GB/Z 32582-2016

National Standard of the People's Republic of China

ICS
29.02
Classification
K 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 General Terms Related to Environmental Protection and Management
  • 3 material, substance declaration and testing related terms
  • 4 Terms related to energy efficiency and power consumption
  • 5 Terms related to resource conservation and reuse
  • Appendix A (informative) power requirements and equipment operating conditions Reference

Foreword

This instructional document has been drafted in accordance with the rules given in GB/T 1.1-2009.

This Guidance Document uses the redrafted Law Amendment adopting the IEC 62542FDIS.2013 "Electrical and Electronic Products and Systems Environmental Standard Standardization of environmental factors standardized term ".

The technical differences between this guidance and the IEC 62542FDIS.2013 are as follows.

--- Taking into account the same focal point issued by the standard consistency issues, the definition of amending 4.7, reference GB /Z 26668-2011, set Meaning 3.10 instead of the original definition.

--- Considering the issue of consistency of standards issued by the same focal point, the revised definition 6.3, reference GB/T 23687-2009, set 3.1.12 instead of the original definition.

--- Canceled normative references, the corresponding content, see the reference.

--- Added Hanyu Pinyin index.

--- According to the guidance of technical documents section number of English corresponding word index adjustment.

--- According to the actual reference to modify the reference part of the standard.

This Guidance Document contains the following editorial changes as compared with IEC 62542FDIS.2013.

--- According to the actual situation in our country revised the introduction part.

--- According to the national standard format, delete part of the scope "According to the provisions of IEC Guide 108, the horizontal standard mainly for technical committee Standard time use. When technical committees prepare relevant publications, horizontal standards are used where applicable. This horizontal standard The content is not applicable unless it is included in the relevant publication or if it has been explicitly stated. " This guidance document is proposed by the National Technical Committee for Environmental Standardization of Electrical and Electronic Products and Systems (SAC/TC297) Focused.

The main drafting of the technical guidance of this document. China Quality Certification Center, Lenovo (Beijing) Co., Ltd., Shenzhen Measurement Quality Inspection Institute.

Introduction

This Guidance Document is intended to provide guidance for the development of new standards and revision of existing standards in the field of electrical and electronic products and systems Examination, revision of other related documents may also refer to the guidance of technical documents.

This Guidance Document will be updated regularly with the development of relevant national and international standards.

Some of the terms and definitions in this technical paper may already appear in other standards, so that it can be widely used in electrical and electronic manufacturing Product and system environment-related standards, its verbatim reservation or partial modification. This guidance document may also include other Terms and definitions that are not yet defined in the standard and relate only to the environmental area of electrical and electronic products and systems.

1 Scope

This Guidance Document sets forth general terms and definitions related to the standardization of the electrical and electronic products and systems environment. Designed for electronic and electronic Gas products and systems to carry out the standardization of environmental factors to provide professional vocabulary reference.

The terms in this technical document refer to the various environmental aspects of the electrical and electronic product life cycle, including but not limited to.

--- Design and supply chain;

--- Material use and statement;

--- Environmental related material analysis method;

--- coping with climate change related factors;

--- Power consumption and energy efficiency;

--- Environmental information;

--- End of life treatment.

2 Common terms related to environmental protection and management

2.1 Design and development

Activities that translate ideas or requests into products.

Note: The design and development process is usually followed by a series of prescribed steps, starting with the initial idea, transforming the idea into a formal specification and then making the prototype Cheng need the relevant documents to support product manufacturing or service specifications. [IEC 62430:2009, Definition 3.1]

2.2 Electronic assembly

A group of components assembled as a single unit, at least one of which is an electronic or electrical component.

Example: A set of components mounted on a printed circuit board or printed circuit board.

2.3 Electronic components

Electronic equipment that can not be disassembled unless it is destroyed or damaged.

Examples Resistors, capacitors, diodes, integrated circuits, hybrid circuits, application specific integrated circuits, winding devices and relays.

Note: Electronic components are sometimes referred to as electronic components or parts.

2.4 Emission

A product or process is released directly or indirectly into the air, water and soil.

Examples The release may include one or more substances, heat, light, sound, electromagnetic fields, and the like.

2.5 Environment

Existence of products or systems, including air, water, land, natural resources, plants, animals, people, and the interrelationships between them. Remark GB/T 24001-2004, definition 3.5.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/Z 32582-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/Z 32582-2016

$235.00