GB/Z 30374-2013Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products (English PDF)
电子电气产品中限用物质评价指南
This is a limited preview
Buy now to download the full PDF (23 pages)
Need quotation for your management?
Get a formal quotation for GB/Z 30374-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
December 31, 2013
Scope
GB/Z 30374-2013 is the English-translated version of 电子电气产品中限用物质评价指南.
GB/Z 30374-2013 is a Chinese national guidance document, not a mandatory standard, on evaluating restricted substances in electrical and electronic products using internationally accepted standards, tools and industry practice.
It is an identical adoption of IEC/TR 62476-2010 and explains how to select and apply the technical documents used for restricted substance evaluation and control, extending the same approach to substances that only need to be declared.
Terms such as restricted substance, declarable substance, producer, supplier and customer are defined, with environmentally conscious design terminology taken from IEC 62430-2009.
Clause 1 states that the document creates no new regulatory framework and is not intended for certification, although the methods described can be integrated into an existing management system. It was issued on 31 December 2013.
Found what you need?
Document preview — GB/Z 30374-2013
National Standard of the People's Republic of China
- ICS
- 13.020.50
- Classification
- K 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
This instructional document has been drafted in accordance with the rules given in GB/T 1.1-2009.
This guidance document uses the translation method equivalent to IEC /T R62476.2010, "Guidelines for the Evaluation of Restricted Substances in Electrical and Electronic Products".
The following technical amendments to this document have been made in accordance with IEC /T R62476.2010.
--- Increasing the normative references "IEC 62430:2009 environmental design of electrical and electronic products" (see Chapter 2);
--- According to the latest development of international standards, the original text of the reference "IEC 62321" was revised to "GB/T 26125-2011 electricity Determination of six restricted substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers) of sub - electrical products (IEC 62321). 2008, IDT) "(see references);
--- According to the latest development of international standards, the original text of the reference "IEC 62474 Electronic and Electrical Products Material Declaration" repair Replaced by IEC 62474:2012 Material Declaration for the Electrical Industry or for Products in the Electrical Industry (see references);
--- According to the latest development of international standards, the original text of the reference "IEC /PAS62596" was revised to "IEC /PAS62596. 2009 "(see references);
--- According to the latest developments in international standards, delete the original reference "IEC /PAS61906 electrical and electronic products Material Declaration Procedure "(see IEC /T R62476 References).
Introduction
Regulatory and customer requirements for restricted substances in electrical and electronic products are receiving increasing attention. Therefore, manufacturers urgently need to establish procedures to fill Electronic material products limited requirements. Due to the complexity of the supply chain in the electrical and electronics industry, different programs need to be established to adapt to them The same type of electrical and electronic products and parts manufacturers.
Different regulations and customer requirements for restricted substances may not be the same.
Under normal circumstances, the "compliance assumption." However, when necessary, the manufacturer provides the relevant documents as additional evidence to the interested parties.
These materials can be derived from analyzing test results. However, for complex products, it is difficult to complete all the analysis and testing; therefore, the need to use other The evaluation method, such as from the supply chain information.
This guidance document is based on international standards and industry practice and is intended to provide an overview of the scope of application of the evaluation method and related technical documents guide.
Different manufacturers determine the appropriate evaluation method for different products. This guidance document provides restricted substance control programs Some basic content
1 Scope
This guidance document provides the use of internationally accepted standards, tools and industry practices for the use of restricted substances in electrical and electronic products Evaluation of the program. This standard also applies to non-limited electronic and electrical products should be declared substance.
This Guidance Document provides guidance on how to select and apply technical documents for restricted substances in electronic and electrical products And related guidelines for evaluation and control methods.
This guidance document does not intend to create a new regulatory framework or use for certification purposes. However, where possible, special products The method of evaluation and control of substances can be integrated into the existing management system.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
Environmental Awareness Design for Electrical and Electronic Products
3 Terms and definitions
IEC 62430-2009 defined and the following terms and definitions apply to this document. For ease of use, the following list is repeated Certain terms and definitions in IEC 62430-2009.
3.1 Restricted substances
Restrictions on the use of the product, part or material in accordance with the regulations or the customer's contract.
3.2 Declarable substance
Substances to be declared in the product according to the regulations or the customer's contract.
3.3 Producer
Organizations that accept suppliers' materials, components and components and provide products to customers.
Note 1. The manufacturer in this Guidance Document has the responsibility of evaluating the material requirements of the product.
Note 2. This guidance document has been prepared from the perspective of the producer on the supply chain. In the supply chain when the manufacturer to provide products to the downstream when its producers The role will be transformed into a supplier.
3.4 Supplier
Provide materials, components and/or components to downstream producers' organizations.
3.5 Customer
The organization or individual who accepts the product.
Remark GB/T 19000-2008, the definition 3.3.5.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.
Referenced standards
Normative references
IEC 62430-2009
Similar standards
How to Download GB/Z 30374-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/Z 102.17-2026 — Semiconductor devices - Discrete devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation
GB/Z 103-2026 — Health informatics - The architecture of internet healthcare service network
GB/Z 108-2026 — Health informatics - Internet healthcare service pattern
GB/Z 30374-2013
$195.00