GB/Z 26958.32-2011Geometrical Product Specifications (GPS) - Filtration - Part 32: Robust profile filters: Spline filters (English PDF)

Foreword

GB /Z 26958 "Geometrical Product Specifications (GPS) filtering" national standardization of technical guidance document is divided into 89, has been transformed For the national standardization of technical documents have the following 9 parts.

--- Part 1. Overview and basic concepts;

--- Part 20. Basic concepts of linear contour filters;

--- Part 22. Linear contour filter spline filter;

--- Part 29. Linear contour filter spline wavelet;

--- Part 31. Robust contour filter Gaussian regression filter;

--- Part 32. Robust contour filter spline filter;

--- Part 40. Morphological contour filter basic concepts;

--- Part 41. Morphology contour filter disk and horizontal line segment filter;

--- Part 49. Morphology contour filter scale space technology. This section GB /Z 26958 Part 32. This section drafted in accordance with GB/T 1.1-2009 given rules.

This section uses the translation method is equivalent to using the International Technical Specification ISO /T S16610-32.2009 "Product Geometrical Specifications (GPS) filter Wave Part 32. Robust Contour Filter Spline Filter ".

For ease of use, this section made the following editorial changes to the original international technical specifications.

--- "This part of International Technical Specifications" be replaced by "This part of the guidance of technical documents";

--- Removed the preface and introduction of the original international technical specifications;

--- In the technical content and preparation of the format with the original international technical specifications.

1 Scope

GB /Z 26958 provisions of this part of the surface contour of the robust spline filter characteristics, as well as the separation of the surface profile of the long wave and Shortwave components of the detailed method.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 3505-2009 Geometrical product specifications (GPS) Surface texture profilometry Terms, definitions and surface texture parameters (ISO 4287:1997, IDT)

Geometrical product specifications (GPS) filtering Part 1. Overview and basic concepts (ISO / TS16610-1:2006, IDT)

Geometrical product specifications (GPS) filtering Part 22. Linear contour filters Spline filters Wave device (ISO /T S16610-22.2006, IDT)

ISO /T S16610-30.2009 Geometrical product specifications (GPS) filtering - Part 30. Basic concepts of robust contouring filters [GeometricalProductSpecifications (GPS) -Filtration-Part 30: Robustprofilefilters.Basicconcepts]

ISO /IEC Guide99.2007 Metrology International glossary based on the common concepts and terminology (VIM) [International vocabulary of metrology-Basic and general criteria and associated devices (VIM)]

3 Terms and definitions

ISO /IEC Guide 99.2007, GB/T 3505-2009, GB /Z 26958.1-2011, GB /Z 26958.22-2011, ISO /T S16610-30.2009 defined in the following terms and definitions apply to this document.

4 Robust spline filter