GB/Z 26211-2010Discomfort glare in the interior working environment (English PDF)
室内工作环境的不舒适眩光
This is a limited preview
Buy now to download the full PDF (39 pages)
Need quotation for your management?
Get a formal quotation for GB/Z 26211-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 14, 2011
Implementation date
January 14, 2011
Scope
GB/Z 26211-2010 is the English-translated version of 室内工作环境的不舒适眩光.
GB/Z 26211-2010 reproduces CIE 55-1983 as a Chinese guidance document on discomfort glare in indoor working environments.
Its first part sets out the basic principles of glare control: the nature of glare, the factors behind discomfort glare such as source luminance, solid angle, position of the source and adaptation luminance, control methods and the glare control systems used in different countries.
The second part reviews research on predicting discomfort glare and proposes a CIE formula, including the case of a large bright ceiling. Informative annexes survey national glare systems, compare prediction systems, explain how the glare parameters are determined and show the CIE formula in practical use.
It is aimed at lighting designers, architects, consultants and students of lighting. It was issued on 14 January 2011.
Found what you need?
Document preview — GB/Z 26211-2010
National Standard of the People's Republic of China
- ICS
- 91.160.10
- Classification
- K 70
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 basic principles of glare control
- 1.1 The natural characteristics of glare
- 1.2 uncomfortable glare control factors
- 1.3 glare control method
- 1.4 glare control system
- 2 Glare control research and application, the requirements of the appropriate formula
- 2.1 The basic formula system
- 2.2 illumination limit system
- 2.3 Identification System Assessment
- 4 CIE Rule
- 4.1 Proposed CIE formula
- 4.2 The Basics of Formulas
- 4.3 Glare from a large light source (bright ceiling)
- Appendix A (Informative) Glare System National Survey
- Appendix B (informative) Comparison of glare prediction system research
- Appendix C (Informative) Calculation of uncomfortable glare parameters to determine
- Appendix D (Informative) Proposed CIE formula for practical application
- References
Foreword
This technical note is equivalent to CIE 55-1983, "Discomfort Glare for Indoor Working Conditions" (English version). This guideline is equivalent to translation CIE55-1983.
For ease of use, the following technical editorial changes have been made to this technical document.
a) Use "." instead of "," as the decimal point
b) Delete the preface of CIE55-1983.
Appendix A, Appendix B, Appendix C and Appendix D of this guidance document are informative appendices.
Introduction
First of all, this technical note provides a technical assessment of uncomfortable glare in indoor work environments. Second, it provides a guideline for predictive lighting The resulting uncomfortable glare proposes a CIE mathematical model, or prediction system. The first part of this guidance document is covered The introduction of basic principles, glare control methods and glare prediction systems used in various countries; the second part focuses on the glare studies carried out And the current predominant forecasting system; and finally to the focus of this guidance document, the CIE forecasting system, which sets the culmination of these studies.
However, this guideline technical document did not make any final judgment on the subject. At the time of the publication of the CIE report, there was a great deal of research on the subject.
The purpose of this guidance document is to provide a selective reference for countries to improve their built projects and to build new systems. This guidance document is also available Will help lighting students and lighting professionals (such as architects, consultants, etc.) to understand what is uncomfortable glare and how to control uncomfortable Suitable for glare.
1 Glare control the basic principles
1.1 The natural characteristics of glare
Definition of glare according to 45-25-295 in the International Glossary of Luminaries (CIE, 17th Edition, 1970). Due to the distribution of lightness or range Surrounding is not appropriate, or contrast is too strong, causing discomfort or resolution of the details or the diminished visual condition of the object. Two definitions.
a) Glare uncomfortable to glare, causing uncomfortable sensations without necessarily diminishing the visibility of objects (as defined in 45-25-315).
b) Glare disabling glare, reducing visibility of the object without necessarily causing discomfort. (Defined at 45-25-320).
Although both types of glare are produced together, they are two completely different phenomena. Caused by disability glare is mainly due to enter the eye The light energy, rather than the illuminance of the light source. In contrast, light illumination is a major factor in uncomfortable glare. Disability glare almost no time, While people in factories or offices are exposed to high-intensity light for long periods of time, with uncomfortable glare also correspondingly increased.
Considering control measurements of glare produced by lamps and luminaires with built-in normal light sources, the control of discomfort glare may be more than disabling Glare control is even more important. If you have adequate control of uncomfortable glare, the subject can normally see that disabling glare can also be well controlled To a certain extent.
The glare referred to in this section refers to uncomfortable glare unless otherwise stated.
1.2 Uncomfortable glare control factors
It is generally accepted that uncomfortable glare produced by a single light source mainly comes from four main parameters, as shown in FIG. 1.
Figure 1 uncomfortable glare parameters Ls --- observer eye direction of the light source illumination; omega --- toward the viewer's eye glaze solid angle; theta --- from the observer glare source angular displacement;
Lf --- observer eyes on the control of the usual level of adaptation to field levels.
It is generally believed that Ls must be between 500 cd/m2 and 700 cd/m2 when uncomfortable glare is present. GB /Z26211-2010/CIE55-1983
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 39 pages — is available in the English PDF.
Referenced standards
Normative references
CIE 45-25-295
Similar standards
How to Download GB/Z 26211-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/Z 102.17-2026 — Semiconductor devices - Discrete devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation
GB/Z 103-2026 — Health informatics - The architecture of internet healthcare service network
GB/Z 108-2026 — Health informatics - Internet healthcare service pattern
GB/Z 26211-2010
$530.00