GB/Z 18427-2001Hydraulic hose assembies - External leakage classification for hydraulic systems (English PDF)

1 Scope

This standard specifies: a unified guidelines to determine the extent of the hydraulic system of partial external vent.

Classification Choose regulations rather than through visual aid equipment to determine the state of the hose leaking joints.

Given the state over a period of time after the leak may change, therefore, the technical guidance document describes in a period of observation leaking state.

Foreword

This document was issued on 28 August 2001 by the State Administration for Market Regulation and the Standardization Administration of the People's Republic of China, and has been in force since 28 August 2001.

It is the first edition of this standard.

The document is under the responsibility of the China Petroleum and Chemical Industry Federation.

Classification: ICS 23.100, CCS G 42.

About this edition

GB/Z 18427-2001 is the first edition of this standard. It was issued on 28 August 2001 and has been in force since 28 August 2001.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite GB/Z 18427-2001 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one from the record of the Standardization Administration.

Edition history and citation

GB/Z 18427-2001 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite GB/Z 18427-2001 itself.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

GB/Z 18427-2001 is classified under ICS 23.100, in the field of fluid systems and general-purpose components. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.

Its Chinese Standard Classification code is CCS G 42. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.

The GB/Z prefix marks a guiding technical document, which is a third category beside the mandatory GB and the recommended GB/T. It is issued when a subject is moving too fast, or is too varied in practice, to be settled in a standard: it records the direction the Chinese standardization system intends to take and the vocabulary it intends to use. It carries no compliance obligation and does not become binding when a contract cites it — which is also why GB/Z 18427-2001 is worth reading early, before the requirements it anticipates arrive as a standard.

The document is under the responsibility of the China Petroleum and Chemical Industry Federation, which is the body that maintains it and that will answer a formal question about its interpretation.

How this standard is designated

The full designation is GB/Z 18427-2001. A citation should carry the number with its year, because the year identifies the text that applies.

In a catalogue or a filing system it is found under ICS 23.100 and CCS G 42 — the international classification and the Chinese one, which are the two codes by which a standard on this subject is searched.