GB/Z 17626.1-2024Electromagnetic compatibility - Testing and measurement techniques - Part 1: Overview of immunity tests (English PDF)

Foreword

This Document was drafted as per the rules specified in GB/T 1.1-2020 Directives for Standardization - Part 1: Rules for the Structure and Drafting of Standardizing Documents.

This Document is Part 1 of GB/T(Z) 17626 Electromagnetic Compatibility - Testing and Measurement Techniques. GB/T(Z) 17626 has published the following parts.

--- GB/Z 17626.1-2024 Electromagnetic compatibility - Testing and measurement techniques - Part 1: Overview of immunity tests;

--- GB/T 17626.2-2018 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test;

--- GB/T 17626.3-2023 Electromagnetic compatibility - Testing and measurement techniques - Part 3: Radiated, radio-frequency, electromagnetic field immunity test;

--- GB/T 17626.4-2018 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient/burst immunity test;

--- GB/T 17626.5-2019 Electromagnetic compatibility - Testing and measurement techniques - Surge immunity test;

--- GB/T 17626.6-2017 Electromagnetic compatibility - Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields;

--- GB/T 17626.7-2017 Electromagnetic compatibility - Testing and measurement techniques - General guide on harmonics and inter-harmonics measurements and instrumentation, for power supply systems and equipment connected thereto;

--- GB/T 17626.8-2006 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power frequency magnetic field immunity test;

--- GB/T 17626.9-2011 Electromagnetic compatibility - Testing and measurement techniques - Pulse magnetic field immunity test;

--- GB/T 17626.10-2017 Electromagnetic compatibility - Testing and measurement techniques - Damped oscillatory magnetic field immunity test;

--- GB/T 17626.11-2023 Electromagnetic compatibility - Testing and measurement techniques - Part 11: Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase;

--- GB/T 17626.12-2023 Electromagnetic compatibility - Testing and measurement techniques - Part 12: Ring wave immunity test;

--- GB/T 17626.13-2006 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Harmonics and inter-harmonics including mains signaling at A.C. power port low frequency immunity test;

--- GB/T 17626.14-2005 Electromagnetic Compatibility - Testing and measurement techniques - Voltage fluctuation immunity test;

--- GB/T 17626.15-2011 Electromagnetic compatibility - Testing and measurement techniques - Flicker-meter - Functional and design specifications;

--- GB/T 17626.16-2007 Electromagnetic compatibility - Testing and measurement techniques - Test for immunity to conducted common mode disturbances in the frequency range 0 Hz to 150 kHz;

--- GB/T 17626.17-2005 Electromagnetic Compatibility - Testing and measurement techniques - Ripple on D.C. input power port immunity test;

--- GB/T 17626.18-2016 Electromagnetic compatibility - Testing and measurement techniques - Damped oscillatory wave immunity test;

--- GB/T 17626.19-2022 Electromagnetic compatibility - Testing and measurement techniques - Part 19: Test for immunity to conducted, differential mode disturbances and signaling in the frequency range 2 kHz to 150 kHz at A.C. power ports;

--- GB/T 17626.20-2014 Electromagnetic compatibility - Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguide;

--- GB/T 17626.21-2014 Electromagnetic compatibility - Testing and measurement techniques - Reverberation chamber test methods;

--- GB/T 17626.22-2017 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Radiated emissions and immunity measurements in fully anechoic rooms (FARs);

--- GB/T 17626.24-2012 Electromagnetic compatibility - Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance;

--- GB/T 17626.27-2006 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Unbalance immunity test;

--- GB/T 17626.28-2006 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Variation of power frequency immunity test;

--- GB/T 17626.29-2006 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips short interruptions and voltage variations on D.C. input power port immunity tests;

1 Scope

This Document gives information and guidance on the EMC basic standards and other basic EMC documents published in the Electromagnetic Compatibility - Testing and Measurement Techniques series. Those basic standards describe mainly immunity tests to be considered and applied for electric and electronic equipment, including systems.

The object of this Document is to give assistance to the technical committees of professional standardization or other bodies, users and manufacturers in · considering the immunity test methods applicable to their products;

- determining the immunity test methods relevant for the electromagnetic environment in which their products are intended to be used;

- specifying the ports of their products being subjected to the relevant immunity test methods.

2 Normative References

The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

IEC 60050-161 [International Electrotechnical Vocabulary (IEV) - Part 161.

NOTE: GB/T 4365-2003 Electrotechnical terminology - Electromagnetic compatibility (IEC 60050-161:1990, IDT)

IEC TR 61000-1-1 [Electromagnetic compatibility (EMC) - Part 1-1.General - Application and interpretation of fundamental definitions and terms]

NOTE: GB/T 17624.1-1998 Electromagnetic compatibility - General - Application and interpretation of fundamental definitions and terms (IEC TR 61000-1-1:1992, IDT) IEC TR 61000-2-5 [Electromagnetic compatibility (EMC) - Part 2-5.Environment - […]