GB/T 9553-2017Jingangmycin A aqueous solution (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces GB/T 9553-1993 "Jinggangmycin agent", and GB/T 9553-1993 compared to the main technical changes are as follows.

--- Appearance changed from "yellow brown to dark brown liquid, no moldy, no caking" to "stable homogeneous liquid, allowing a small amount of sediment";

--- Jinggangmycin A by the control of mass concentration was changed to control the mass fraction;

--- Increasing 8%, 13%, 24% of the three specifications;

--- Remove the sediment control project indicators;

--- Increased water insoluble, dilute stability, low temperature stability, heat storage stability control project.

1 Scope

This standard specifies the requirements of Jing Jingmycin agent, test methods and signs, labels, packaging, storage and transportation, safety and guarantee period.

This standard applies to Jinggangmycin A and water and appropriate additives composed of Jinggangmycin agent.

Note that the other names, structural formulas and basic physicochemical parameters of validamycin are given in Appendix A.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 1601 Determination of pesticide pH value

GB/T 1604 commodity pesticide acceptance rules

Commercial pesticides sampling method

GB 3796 Pesticide packaging General

GB/T 6682-2008 analytical laboratory water specifications and test methods (ISO 3696:1987, MOD)

Representation and determination of rules for repair of numerical values and limit values GB/T 8170-2008

Determination of heat storage stability of GB/T 19136 pesticides

GB/T 19137 Determination of low temperature stability of pesticides

GB/T 28136 Determination of pesticides insoluble in water

3 Requirements