GB/T 8899-2013Determination of maceral group composition and minerals in coal (English PDF)
煤的显微组分组和矿物测定方法
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 8899-2013 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Level / Type
National · Recommended
Issue date
December 17, 2013
Implementation date
May 1, 2014
Scope
GB/T 8899-2013 is the English-translated version of 煤的显微组分组和矿物测定方法.
GB/T 8899-2013 — This standard specifies the method for determining microstructure grouping of coal (or microscopic component) and the volume fraction of the mineral in reflected polarized light microscopy.
This standard applies to pulverized lignite-ray film, made of bituminous coal and anthracite.
Found what you need?
Document preview — GB/T 8899-2013
National Standard of the People's Republic of China
- ICS
- 73.040
- Classification
- D 26
- Replacing
- GB/T 8899-1998
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Method summary
- 5 Apparatus and materials
- 5.1 reflection polarizing microscope
- 5.3 Counter
- 5.4 Sample installation equipment
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 8899-1998 "microstructure grouping of coal and mineral determination." And GB/T 8899-1998 compared to
The main changes are as follows.
--- Added "Terms and Definitions" chapter.
--- Deleted the "semi-vitrinite" content.
This standard uses redrafted Law Amendment uses ISO 7404-3.2009 "Analysis of coal and rock - Part 3. maceral group consisting of
test methods".
This standard and ISO 7404-3.2009, compared with more adjustment in the structure, listed in Appendix A of this standard and ISO 7404-3.2009
The reg number control list.
This standard and ISO 7404-3.2009 as compared to the existence of technical differences, these differences involve the provision has passed the gap in the outside margin
Vertical single-line positions were marked, Appendix B gives a list of corresponding technical differences and their causes.
This standard and ISO 7404-3.2009, compared also made the following editorial changes.
a) use the "standard" instead of "this International Standard";
b) use a decimal point instead of a decimal comma ",". ",";
c) Remove the foreword and introduction of international standards.
The standard proposed by China Coal Industry Association.
This standard coal by the National Standardization Technical Committee (SAC/TC42) centralized.
This standard was drafted. Coal Science and Industry Group, Xi'an Institute.
1 Scope
This standard specifies the method for determining microstructure grouping of coal (or microscopic component) and the volume fraction of the mineral in reflected polarized light microscopy.
This standard applies to pulverized lignite-ray film, made of bituminous coal and anthracite.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 12937 Rock term coal (GB/T 12937-2008, ISO 7404-1.1994, MOD)
GB/T 15588 Classification bituminous coal Maceral
GB/T 16773 Analysis of coal sample preparation method (GB/T 16773-2008, ISO 7404-2. 1985, MOD)
3 Terms and Definitions
Terms and definitions GB/T 12937 apply to this defined standard.
4 Method summary
Pulverized coal ray reflective polarizer is placed under the microscope in polarized light or not completely orthogonal polarization, to be able to accurately identify the mineral composition and microstructure
Based on the statistics of the microstructure and mineral packets with the volume fraction of the number of point method.
5 Apparatus and materials
5.1 reflection polarizing microscope
Should the blue filter in the incident path. Dry objective should be x 20 ~ x 50, oil immersion objective should be x 25 ~ x 60, eyepiece should
x 8 ~ x 12.5. Eyepiece should be equipped with micrometer and crosshairs.
Reflection reflection fluorescence polarization microscope equipped with appropriate means.
5.2-foot stage push
In the transverse direction (X) and vertical (Y) on the range of movement of not less than 25mm, and are able to move and other steps.
5.3 Counter
Measuring points were recorded at least eight kinds of ingredients; count should be equipped with computers, and the preparation of the corresponding data processing, report output and other software.
5.4 Sample installation equipment
Slides, clay and leveler.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 12937Terms relating to coal petrology
- GB/T 12937-2008Terms relating to coal petrology
- GB/T 15588Classification of macerals for bituminous coal
- GB/T 16773Method of preparing coal samples for the coal petrographic analysis
- GB/T 16773-2008Method of preparing coal samples for the coal petrographic analysis
ISO 7404
Cited by
- GB/T 46291-2025General rules of coal petrographic analysis
- GB/T 397-2022Commercial coal quality - Coal for coke making
- GB/T 23810-2021Commercial coal quality—Coal for direct liquefaction
- GB/T 35064-2018Specification of feedstocks for coal-oil co-processing
- YB/T 077-2017Method for determining optical texture of coke
- GB/T 31356-2014Quality evaluation and control guide for commercial coal
How to Download GB/T 8899-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12937-2008 — Terms relating to coal petrology
GB/T 15588-2013 — Classification of macerals for bituminous coal
GB/T 16773-2008 — Method of preparing coal samples for the coal petrographic analysis
Secure payment via Stripe
Payments accepted
GB/T 8899-2013
$135.00