GB/T 8336-2011Special threads gauges for gas cylinders (English PDF)
气瓶专用螺纹量规
This is a limited preview
Buy now to download the full PDF (9 pages)
Need quotation for your management?
Get a formal quotation for GB/T 8336-2011 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
July 30, 2026
Implementation date
February 1, 2027
Scope
GB/T 8336-2011 is the English-translated version of 气瓶专用螺纹量规.
GB/T 8336-2011 is the Chinese standard "Special threads gauges for gas cylinders". It was issued by State Administration for Market Regulation; Standardization Administration of China. Issued on 2026-07-30, in force from 2027-02-01.
Found what you need?
Document preview — GB/T 8336-2011
National Standard of the People's Republic of China
- ICS
- 23.020.30
- Classification
- J74
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Quantities to be measured
- 4.1 Radial seal
- 4.2 Axial seal
- 5 General conditions and procedures concerning in situ tests
- 5.3 Housing dimensions and tolerances
- 5.4 Coaxiality tolerance of housing
- 5.5 Surface roughness
- 6 Instrumentation
- 6.1 Application selection of O-rings
- 6.2 Determination of O-ring housing dimension
- 7 Determination of fan pressure
- 8 Determination of flowrate
- 9 Determination of power
1 Foreword
GB/T 8336-2011 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 July 2026 and has been in force since 1 February 2027.
It replaces the earlier edition GB/T 8336-1998, GB/T 8336-1987.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
GB/T 8336-2011 falls under ICS 23.020.30, in the field of fluid systems and general-purpose components.
This catalogue holds 854 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Sector: National Standard (Recommended)
Issued by: State Administration for Market Regulation; Standardization Administration of China
English translation: about 9 pages (approximate)
Chinese original: about 14,162 characters
4 Related standards
Other editions:
GB/T 8336-2026 (later edition)
GB/T 8336-1998 (earlier edition)
GB/T 8336-1987 (earlier edition)
Standards on related subjects:
GB/T 9251-2022 — Methods for hydrostatic test of gas cylinders
GB/T 9019-2015 — Nominal diameter for pressure vessels
GB/T 8335-2026 — Special threads for gas cylinder
GB/T 8334-2026 — Periodic inspection and evaluation of liquefied petroleum gas and liquefied dimethyl ether steel gas cylinders
5 Classification and status
International classification (ICS): 23.020.30
Chinese Standard Classification (CCS): J 74
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 8334-2026Periodic inspection and evaluation of liquefied petroleum gas and liquefied dimethyl ether steel gas cylinders
- GB 33146-2025Valves for liquefied dimethyl ether cylinders
- GB 35208-2025Overflow cutoff valves for liquefied petroleum gas cylinders
- GB/T 13077-2024Periodic inspection and evaluation of seamless aluminum alloy gas cylinders
- GB/T 19533-2024Periodic inspection and evaluation of steel cylinders for compressed natural gas in vehicles
- GB/T 24162-2022Periodic inspection and evaluation of hoop wrapped fibre reinforced composite gas cylinders with metal liners of compressed natural gas for automotive vehicles
How to Download GB/T 8336-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 8336-2011
$165.00