GB/T 8069-2024Geometrical product specifications (GPS)—Functional gauges (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

This document replaces GB/T 8069-1998 "Functional Gauges". Compared with GB/T 8069-1998, except for structural adjustments and editorial changes, In addition, the main technical changes are as follows.

a) The scope of application of the standard has been changed (see Chapter 1, Chapter 1 of the 1998 edition);

b) The definition of "functional gauge" has been changed (see 3.1, 3.1 of the 1998 edition);

c) Added the definition of "Entity Function Gauge" (see 3.1.1);

d) Added the definition of “digital function gauge” (see 3.1.2);

e) Deleted "General Provisions" and incorporated the corresponding contents into "Operational Specification Design of Functional Gauges", "Inspection and Conformity of Functional Gauges" and "General Provisions of Functional Gauges".

"Determination of conformity of the work under test" and "Determination of conformity of the work under test" (see Chapters 4, 5, 6, and Chapter 5 of the 1998 edition);

f) Change “form and position tolerance” to “geometric tolerance” (see C.2, Chapter 4 of the 1998 edition);

g) Change “fundamental deviation” to “limit deviation” (see C.2, Chapter 4 of the 1998 edition);

h) "Basic size" is changed to "nominal size" and the corresponding symbols are changed (see C.2, Chapter 4 of the 1998 edition);

i) Added “Main types of physical function gauge detection parts” (see Table C.2);

j) The requirement for unindicated tolerance grade for linear dimensions of functional gauges has been deleted (see 8.2.5 of the 1998 edition);

k) The provisions on marking, packaging and certification of functional gauges have been deleted (see 9.7 to 9.10 of the 1998 edition).

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document is proposed and coordinated by the National Technical Committee for Standardization of Product Geometry Technical Specifications (SAC/TC240).

This document was drafted by: Anhui Shangzhan Mould Industry Co., Ltd., Shanghai University, China Machinery Productivity Promotion Center Co., Ltd., Pan Asia Automotive Automotive Technology Center Co., Ltd., Shenzhen Metrology and Quality Inspection Institute, Sichuan Industrial Metrology and Testing Institute, Zhengzhou University, Jinan Shengda Construction Industrial Measuring Tools Co., Ltd., Shandong Industrial Technology Research Institute of Zhejiang University, Shanghai Moyuanfang Information Technology Co., Ltd., Shandong Metrology Science Research Institute Institute of Technology, Zhejiang University Ningbo Institute of Technology, Shanghai Weilai Automobile Co., Ltd., Ningbo Haozuan Technology Co., Ltd., China Machinery Research Institute of Standards and Technology (Beijing) Ltd.

The main drafters of this document are: Li Ming, Wang Yuexia, Zhu Yue, Hu Min, Guo Jiping, Duan Ling, Zheng Peng, Liu Wenjing, Wei Qingyue, Zhan Gaowei, Zhang Zongzheng, Chai Zitao, Zhang Jian, Ma Xiushui, Gao Yu, Ma Xie, Chen Junlei.

This document was first issued in 1987, revised for the first time in 1998, and this is the second revision.

Geometric Product Specification (GPS) Functional Gauge

1 Scope

This document specifies the design of functional gauges and their operating specifications, the inspection, conformity determination and arbitration of functional gauges, and the Conformity determination and arbitration.

This document applies to the design and application of physical and digital functional gauges. Some unmarked maximum physical/minimum physical requirements It is used as a reference for the design and application of inspection equipment according to the geometric tolerance requirements.

2 Normative references

GB/T 1182

GB/T 16671

GB/T 17851

GB/T 18779.1

GB/T 18779.3

GB/T 18779.6

3 Terms and definitions

The terms and definitions defined in GB/T 1182, GB/T 16671, GB/T 17851 and GB/T 18779.6 and the following terms and definitions apply to this document.