Valid

GB/T 7676.8-2017Direct acting indicating analogue electrical measuring instruments and their accessories—Part 8: Special requirements for accessories (English PDF)

直接作用模拟指示电测量仪表及其附件 第8部分:附件的特殊要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 7676.8-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 7, 2017

Implementation date

April 1, 2018

Scope

GB/T 7676.8-2017 is the English-translated version of 直接作用模拟指示电测量仪表及其附件 第8部分:附件的特殊要求.

GB/T 7676.8-2017 is the Chinese standard "Direct acting indicating analogue electrical measuring instruments and their accessories—Part 8: Special requirements for accessories".

Its scope clause reads: GB/T 7676 provisions of this part of the classification, classification and compliance, technical requirements, information, signs and symbols, packaging and storage As well as inspection rules.

This section applies to the following direct effects analog electrical measuring instruments annex. --- Splitter; --- Series resistors and resistors; --- Hall current sensor; --- Hall voltage sensor; --- Electronic converter.

This section does not apply to the corresponding provisions of the corresponding national standards used as an attachment special purpose device. Its clauses include terms and definitions; classification, grading and compliance.

Found what you need?

Document preview — GB/T 7676.8-2017

National Standard of the People's Republic of China

ICS
17.220.20
Classification
N 21
Replacing
GB/T 7676.8-1998

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Classification, grading and compliance
  • 5 technical requirements
  • 6 information, signs and symbols
  • 7 Packaging and storage
  • Appendix A (Normative) Pilot Project
  • Appendix B (informative) Major technical changes compared with the previous version

1 Scope

GB/T 7676 provisions of this part of the classification, classification and compliance, technical requirements, information, signs and symbols, packaging and storage

As well as inspection rules.

This section applies to the following direct effects analog electrical measuring instruments annex.

--- Splitter;

--- Series resistors and resistors;

--- Hall current sensor;

--- Hall voltage sensor;

--- Electronic converter.

This section does not apply to the corresponding provisions of the corresponding national standards used as an attachment special purpose device.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 7676.1-2017 Direct acting analogue indicating electrical measuring instruments and their accessories Part 1. Definitions and general requirements

GB/T 7676.2-2017 Direct acting analogue indicating electrical measuring instruments and their accessories Part 2. Ammeter and voltmeter special

Special requirements

GB/T 7676.3-2017 Direct acting analogue indicating electrical measuring instruments and their accessories Part 3. Power meter and reactive power meter

Special requirements

GB/T 7676.4-2017 Direct acting analogue indicating electrical measuring instruments and their accessories - Part 4. Particular requirements for frequency tables

GB/T 7676.5-2017 Direct acting analogue indicating electrical measuring instruments and their accessories Part 5. Phase meter, power factor meter and

Synchronous indicator of the special requirements

GB/T 7676.9-2017 Direct acting analogue indicating electrical measuring instruments and their accessories Part 9. Recommended test methods

Instrumentation transformers - Part 2. Additional requirements for current transformers (Instrumenttransformers -

Part 2.Additionalrequirementsforcurrenttransformers)

3 Terms and definitions

GB/T 7676.1-2017 defined terms and definitions apply to this document.

4 Classification, grading and compliance

4.1 Classification

4.1.1

According to the nature of the annex is divided into.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

Editions of GB/T 7676.8

EditionTitleRevisionStatus
GB/T 7676.8-2017Direct acting indicating analogue electrical measuring instruments and their accessories—Part 8: Special requirements for accessoriescurrent editionCurrent
GB/T 7676.8-1998Direct acting indicating analogue electrical measuring instruments and their accessories—Part 8: Special requirements for accessoriesprevious editionSuperseded

This page sells the current edition, GB/T 7676.8-2017. Earlier editions are listed for reference only.

How to Download GB/T 7676.8-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 7676.8-2017

$295.00