GB/T 6468-2010The helix artifact of gear (English PDF)
齿轮螺旋线样板
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6468-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 10, 2011
Implementation date
October 1, 2011
Scope
GB/T 6468-2010 is the English-translated version of 齿轮螺旋线样板.
GB/T 6468-2010 is the Chinese standard "The helix artifact of gear". Its scope clause reads: This standard specifies the terms and definitions of gear helix model, type and basic parameters, requirements, and other test methods, marking and packaging.
Hereinafter referred to as "model"). Note. Non-involute gear helix model may refer to this standard. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 6468-2010
National Standard of the People's Republic of China
- ICS
- 17.040.30
- Classification
- J 42
- Replacing
- GB/T 6468-2001
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the terms and definitions of gear helix model, type and basic parameters, requirements, and other test methods, marking and packaging.
Hereinafter referred to as "model").
Note. Non-involute gear helix model may refer to this standard.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 10095.1-2008 Cylindrical gear accuracy system - Part 1. Definitions tooth surface deviation and ipsilateral tooth allowable value (ISO 1328-1.1995, IDT)
GB/T 17163-2008 dimensional measuring instruments - Basic terminology
3 Terms and Definitions
GB/T 17163-2008, GB/T 10095.1-2008 established in the following terms and definitions apply to this standard.
3.1
Calibration of measuring instruments of all kinds of spiral standard measurement equipment, mainly used for transmission gear helix parameter value, and indeed correction instrument indication
Given instrument indication error.
3.2
When the plane along a fixed cylindrical surface (cylindrical surface yl) pure rolling, a constant angle with the base of the cylinder axis on the plane
Tilt staggered straight line into a fixed spatial trajectory surface (see Figure 1).
Figure 1 involute
3.3
When fixed points along the cylindrical surface of a bus for constant movement, and the bus turn around the axis of the cylindrical surface of constant angular velocity rotation, fixed points […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 6468
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 6468-2010 | The helix artifact of gear | current edition | Current |
| GB/T 6468-2001 | The helix artifact of gear | previous edition | Superseded |
This page sells the current edition, GB/T 6468-2010. Earlier editions are listed for reference only.
How to Download GB/T 6468-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 6468-2010
$165.00